Complaint
This machine tool is a high speed, high precision, high reliability of inclined bed machine tool. The main components such as bed base, bed body and headbox are cast from high strength materials to ensure the long-term stability of the machine tool.
Machine adopts 45 ° inclined bed overall structure, configuration and high precision linear rolling guide, preload Taiwan adopt servo motor with high torque low inertia and elastic coupling screw straight league, screw pre-stretching structure is used in bearing can eliminate drive back gap and thermal deformation precompensation machine running for a long time influence on accuracy, ensure the position precision and repeat positioning accuracy; The position precision of the machine is high, and the chip removal is smooth, suitable for high speed and high precision machining.
High speed high precision high rigidity cartridge spindle unit, servo spindle motor, can achieve higher spindle speed. The spindle unit is assembled in a constant temperature room. After assembling, it runs continuously for 72 hours at constant temperature, and then runs continuously for 72 hours after running on the machine to ensure the reliability of high-speed and high precision performance.
Choice of tool row mode, tool change speed, high positioning accuracy.
Machine tool protection adopts full protection design, pleasant, beautiful and unique, waterproof and anti-chip reliable, easy to maintain.
| Project | ||||||
| TCK6340 | TCK6340S | TCK6350 | ||||
| Maximum turning diameter on the bed | mm | Φ400 | Φ400 | Φ520 | ||
| The maximum turning diameter of the slide | mm | Φ140 | Φ140 | Φ220 | ||
| Maximum disc machining diameter | mm | Φ400 | Φ400 | Φ520 | ||
| Maximum turning length | With row knife | mm | 200 | 390 | 410 | |
| With hydraulic turret | mm | 110 | 300 | 330 | ||
| Spindle end type | A2-5 | A2-5 | A2-6 | |||
| Spindle through hole diameter | mm | Φ49 | Φ49 | Φ66 | ||
| Bar diameter | mm | Φ40 | Φ40 | Φ55 | ||
| hydraulic chuck | mm | 6 inches | 6 inches | 10 inches | ||
| Hydraulic chuck pull rod through hole | mm | Φ40 | Φ40 | Φ55 | ||
| Rail form | line rail | line rail | line rail | |||
| Spindle taper taper | No | 44° | MT4 | 1:20 | ||
| Spindle limit speed | rpm | 3500 | 3500 | 3000 | ||
| Sword tower | 8 | 8 | 8 | |||
| Knife square size | mm | 20x20 | 20x20 | 25x25 | ||
| Screw model | X direction | mm | 3210-630-840 | 3210-630-840 | 3210-720-930 | |
| Z direction | mm | 3210-445-703 | 4010-733-965 | 4010-733-965 | ||
| Rail model | X direction | mm | MSR30S2SSF1+R760 | MSR30S2SSF1+R760 | MSR30S2SSF1+R880 | |
| Z direction | mm | MSR30S2SSF1+R760 | MSR30S2SSF1+R960 | MSR30S2SSF1+R1040 | ||
| X/Z motor torque | N.M | 6 | 6 | 7.5 | ||
| X/Z rapid traverse speed | m/min | 24 | 24 | 24 | ||
| X travel | mm | 400 | 400 | 500 | ||
| Z travel | mm | 300 | 400 | 500 | ||
| Minimum setting unit | mm | 0.001 | 0.001 | 0.001 | ||
| Main motor power | KW | 5.5 | 5.5 | 7.5 | ||
| Main motor power | KW | 10 | 12 | 13 | ||
| Machine net weight | Kg | 2200 | 2500 | 2900 | ||
| Dimensions (L×W×H) | mm | 2200×1530×1780 | 2390×1530×1780 | 2500×1620×1890 | ||
Transmission:
Screw and nut are processed, ground and assembled in the constant temperature workshop.
And quality control, can ensure its high precision stability.
Linear guide is designed with 4-row roller type 45° contact Angle and high rigidity section, which has the characteristics of strong load bearing capacity, low friction force, good rigidity, low noise and good lubrication effect.
Machine tool lubrication instructions:
Each lubrication point adopts forced automatic lubrication device for fixed point quantitative lubrication lead screw and guide rail, when there is abnormal state or insufficient oil, automatic warning signal, stable and reliable work.
FAQ:
1:How can I choose the most suitable machines ?
A: Please tell me your specifications ,we can choose the best model for you , or you can choose the exact model .
You can also send us the products drawing ,we will choose the most suitable machines for you .
2: What's your main products of your company?
A: We specialized in all kinds of machines ,such as CNC Lathe Machine ,CNC Milling Machine ,Vertical Machining Center ,Lathe
Machines ,Drilling Machine ,Radial Drilling Machine ,Sawing Machine ,Shaper machine and so on .
3: Where is our factory located? How can I visit there?
A : Our factory is located in Tengzhou City ,Shandong Province,277500 China. You are warmly welcomed to visit us.
4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.
5: What's the Payment Terms ?
A : T/T ,30% initial payment when order ,70% balance payment before shipment ;
Irrevocable LC at sight .
5: What's the MOQ?
A: 1 set .(Only some low cost machines will be more than 1 set )
