Complaint
| Model | LYH824 | |
| Pattern | 4×4 | |
| Overall Dimension(mm) | Long | 4060 |
| Width | 2038 | |
| High | 2810 | |
| Wheelbase (mm) | 2195 | |
| Front wheel tread(mm) | 1385-1685(1485) | |
| Rear wheel tread(mm) | 1620-2020(1620) | |
| Ground clearance(mm) | 476/396 | |
| Turning radius (mm) | 5.1 | |
| Structure quality | Belt cab | 3350 |
| Does not bring the cab | 3100 | |
Quality assignment | Belt cab | 1340 |
| Does not bring the cab | 1300 | |
| Trailing wheel belt cab | 2250 | |
| Does not bring the cab | 2040 | |
| Smallest use quality(kg) | ||
| Belt cab | 3590 | |
| Does not bring the cab | 3340 | |
| Counterweight | ||
| First counterweight | 310 | |
| Latter counterweight | 480 | |
| Fixed force of traction(KN) | 15.8/16.6/17.3 | |
| Engine model | 4108T82/4108T86/4110T90 | |
| Demarcation power(KW) | 60.3/63.2/66.2 | |
| Files number | 16F+8Ror8F+4R | |
| Speed range | 0.46-36.9 | |
| Power transmission coupling | Monolithic, the dry type, the butterfly-shaped spring contract, the independent operation, the double-acting type coupling | |
| Gear box | The host vice-speed change shifts gears for the straight meshing wrap | |
| Rear axle of car central rotation | Spiral bevel gear | |
| Differential device | Closed type, 4 planet bevel gears | |
| Differential lock | Meshing model | |
| Latter final transmission | The single stage planet gear type, sets outside the rear both sides | |
| In front of first driving axle central transmission | ---- | |
| First differential device | ---- | |
| First final transmission | ---- | |
| Transfer | ---- | |
| Front wheel tire specification | 6.5-20 | |
| Trailing wheel tire specification | 16.9-34/14.9-30or13.6-38 | |
| Changes the form | The independent oil duct, the entire hydraulic pressure front wheel changes | |
| Travel brake | The static hydraulic pressure, the disc type, under the human control sets at the footboard | |
| Parking brake | The handle operation, the multi-rubbing surface machinery contracts the oil bath type | |
| Ploughs the deep control mode | The position control, the fluctuation control (elects to install strength position integrated control) | |
| After system biggest lifting capacity (KN) (point of suspension 610m place) | Being bigger than15 | |
| Suspension unit | After three is hanging | |
| Dynamic output speed of spindle (r/min) | Postpositioned free standing760/1000 | |
| Draw gear form | Suspends the type draw link adjustable, the draw link position | |
