Haiwang IC Chips Biss0001 Factory China Built-in Reference Voltage Sensor Signal Processing Integrated Circuit for Passive Pyroelectric Infrared Switch

Min.Order: 1,000
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 0.1 ~ 0.2

Description

Product Code: pyroelectric infrared processing IC (BISS0001)

Product specifications: DIP / SOP

Product Description:
BISS0001 is one section that has a high-performance sensing signal processing integrated circuit. It matches the pyroelectric infrared sensor and few outsides meet the primary device constitution passive from the pyroelectric infrared switch. It can automatically open each kind of incandescent lamp, fluorescent lamp, buzzer, automatic valve, electric fan, dryer fast, and so on, is suitable especially for the enterprise, the guesthouse, the market, the storehouse, and the family corridor, the corridor, and another sensitive region, or uses in the safety zone the automatic
light, the illumination, and the alarm system.

Features
* CMOS craft
* digital-analog mix
* has the independent high input impedance operational amplifier
* interior bidirectional amplitude discriminator to be possible to suppress the disturbance
*in to suppose the delay time timer and the blocking time timer effectively
* uses 16-foot DIP seal

BISS0001 PIR Detecting Control IC

BISS0001 is a sensor signal processing integrated circuit that has high performance. It matches with a pyroelectric infrared sensor and a few external components to constitute a passive pyroelectric infrared switch. It can automatically open all kinds of flashlight lamps, fluorescent lamps, buzzers, automatic doors, electric fans, dryers, and automatic sink devices, especially in sensitive areas like enterprises, hotels, shopping malls, warehouses, garages, corridors, and so on. it's also widely used in safety areas where there are automatic lighting, illumination devices, and alarm systems.
Feature
1. Professional CMOS mixed-signal integrated circuits.
2. With independent high input impedance of the operational amplifier which can match with a variety of sensors to signal and process.
3. Bidirectional discriminator which can effectively resistance to interference. 
4. Built-in delay time timer and block time timer.
5. New structure, stable and reliable performance, and wide adjustment range.
6. Built-in reference voltage.
7. Operating voltage: 3-5V
8.16 feet DIP and SOP encapsulation.
Application
Used for a variety of sensors and delay controller
Limit Parameter(Vss=0V)
1. Power voltage:-0.3V - 6V
2.Input voltage:VSS-0.3V - VDD+0.3V(VDD=6V) 
3.leading-out terminal maximum current:±10mA(VDD=5V) 4.Operating temperature:-10oC - +70oC
5. Storage temperature:-65oC - +150oC
Product Parameters
Electric Parameter
 
SymbolParametersTest ConditionsValueUnit
   MinMax 
VDDOperating vol. rang-36V

IDD

Operating current
Output
ut No Load
VDD=3V-50
uA
   VDD=5V-100 
VosInput offset voltageVDD=5V-50mV
IosInput offset CurrentVDD=5V-50nA
Avoopen-loop voltage
gain
VDD=5V,RL=1.5M60-dB
CMRRcommon mode
rejection ratio
VDD=5V,RL=1.5M60-dB
VYHop-amp output high
level

VDD=5V,RL=500K,1/2 VDD
4.25-
V
VYLop-amp output low
level
 -0.75 
VRHVc input high levelVRF=VDD=5V1.1-V
VRLVc input low level -0.9 
VoHVo outputs a high levelVDD=5V,IoH=0.5mA4-V
VoLVo output low levelVDD=5V,IoL=0.1mA-0.4V
VAHAn end input high
level
VDD=5V3.5-V
VALAn end input low
level
VDD=5V-1.5V

Foot Function
 
 ItemI/OFunction specification

1

A

I
Repeatable triggered and a non-repeatable trigger control end. A = "1" is the trigger while A = "0" is
non- repeatable


2


VO


O
The control signal output. It is an effective trigger when the Vo is triggered by the dance edge on Vs jump from a low level to a high level. It is a low-level state when the Tx output delay time is beyond and the
Vs turns to Vo
3RR1--Adjustment end of output delay time TX
4RC1--Adjustment end of output delay time TX
5RC2--Adjustment end of trigger block time Ti
6RR2--Adjustment end of trigger block time Ti
7VSS--Operating power negative end

8

VRF

I
The reference voltage and reset input end which
usually is connected to the VDD. It can make the timer reset with connected to the "0".

9

VC

I
Trigger ban end. When Vc < VR, it bans trigger;  When  VC  >  VR  ,  it  allows trigger. VR
material 0.2 VDD
10
IB

--
Operational amplifier bias current settings end.The RB  is connected to VSS end, then RB value is
about 1 M Ω
11VDD--Operating power positive end. It is 3-5V.
122OUTOThe second operational amplifier output end
132IN-IThe  second  operational amplifier negative output end
141IN+IThe first operational amplifier positive input end
151IN-IThe first operational amplifier negative input end
161OUTOThe first level operational amplifier output end
 
Product Description


 

FAQ

1. Are you a factory or trading company?
We are a professional manufacturer established in 2004, with more than 20 years of experience in the security protection industry.

2. How can I get a sample to check your quality?
The sample order is acceptable. Please contact us for more details.

3. What's the Payment?
- T/T would be better with quick transfer and few bank fees.
- L/C, Western Union, and PayPal. VISA and MasterCard are acceptable.

4. How long is your delivery time?
- 1-3 working days for sample order
- for general order, 3-20 days after advanced payment
Please contact us for more details.

5. What about the warranty?
- For the strobe/sensor, we provide 18 months warranty; parts are 2 years.
- for the alarm panel, we provide 24 monthly warranty.

6. Where is your factory located? How can I visit there?
Our factory locates in Shenzhen, in China, Near Hongkong and Guangzhou. We are warmly welcome you to visit our factory and cooperate with us.

7. What's your advantage? Why did we choose you?
- Factory price. Over 15 years of experience in this industrial area
- Great production capacity, support OEM&ODM
- 100% new materials, with a defective rate lower than 0.2%.

Product Tag:
Related categories:
Scroll to Top