Description
Air piping filter(1)Filter efficiency is determined in accordance with CAGI standard ADF400, its calculation basis is 38ºC inlet air temperature.(2)Filter efficiency is determined in accordance with CAGI standard ADF500, its calculation basis is 38ºC inlet air temperature.Product introduction and features1. Piston filter element is sealed with shell to Prevent unfiltered air from bypassing the filter.
2. Anti-corrosion filter element;
Stainless steel core to enhance structural performance;Low airflow resistance;Using seam welding to improve strength.3. New "matrix hybrid fiber" media
Effective surface area-Improved filter rate-to ensure high efficiency.The open area is large, minimize the pressure drop.4.Coated closed foam sleeve
Resistant to oil and acid chemical attacks;Prevent coalescence liquid from mixing back into the air stream to ensure efficiently.Anti -chemical corrosion end cover is bonded with special adhesives to the mediumSilicone-free;withstand 66ºC high temperature.Five filter elements can be selected for your design to ensure the quality of the air supply system.C- centrifugal oil-water separatorSuitable for filtering a large volume of liquid and 3 microns -sized condensate(5ppm w/w Maximum residual oil content)Dual -level filteringLevel 1-Two stainless holes, 10 micron mechanical separationLevel 2-Deep Fiber Medicine Filtering 3 microns of solid and liquid particlesT-Supervisor FilterSuitable for filtering liquid water and oil;Filter Solid particles as small as 1 micron (1.0ppm w/w Maximum residual oil content)Internal/outer filter element is anti -corrosionDual -level filteringLevel 1-Fiber media and medium filter alternate layer to filter out larger particlesLevel 2-Multi-layer epoxy resin adhesive to mixing with fiber media, polycotic mold and filtering solid particlesA-Micro oily mist filterSuitable for small Gathered Water vapor and oily mist;Filter Solid particles as small as 0.01 micron(0.01ppm w/w Maximum residual oil content)Internal/outer filter element is anti -corrosionDual -level filteringLevel 1-Multi-layer fiber medium and medium filter to Filter removal of larger particles, pre-filtering before the air gas entering the third-level filtration.Level 2-Multi-layer matrix mixed fiber medium, filter out very fine condensate.Coated closed foam sleeve.AA-Ultra -efficient micro oily mist filterSuitable for the extremely fine water vapor and oil dew; Filter Solid particles as small as 0.01 micron(0.001ppmw/w Maximum residual oil content) Internal/outer filter element is anti -corrosionDual -level filteringLevel 1-Coated closed foam sleeve,Filter and airflow dispersalLevel 2-Multi -layer matrix hybrid fiber media, filter out very small condensateCoated closed foam sleeve.H-Removing oil and deodorizing activity carbon filterSuitable for filtering the activated carbon that can be absorbed by the oil steam and hydrocarbons steam that can be absorbed; Filter Solid particles as small as 0.01 micron(0.003ppm w/w Maximum residual oil content)Internal/outer filter element is anti -corrosionDual -level filteringLevel 1-Extremely fine activated carbon powder stabilized layer, which can be filtered out of most oil steamLevel 2-Multi-layer fiber medium, adhesive micro-active carbon powder, can be filtered to remove residual oil steamMulti -layer fine medium to prevent pollutants from movingCoated closed foam sleeve.,Prevent the fibers driftingUnder rated operating conditions, the design life can reach 1000 hoursProduct specification:Model/Item | Airflow (Nm³/min) | size of interface | Dimension(mm) | Filter model | Filter quantity | Weight |
HF-001 | 1.2 | Rol" | 285x105 | E(Grade)-16-II | | 1.22 |
HF-002 | 2.4 | Rol" | 328x:105 | E(Grade)-20-II | 1.33 |
HF-004 | 3.8 | Rol" | 350x135 | E(Grade)-24-II | 2.28 |
HF-007 | 7 | Ro1-1/2" | 550x164 | E(Grade)-32-II | 4.04 |
HF-010 | 11 | Ro1-1/2" | 660x164 | E(Grade)-36-II | 4.62 |
HF-013 | 14 | DN50/Ro2" | 979/847360/150 | E(Grade)-40-II | 46/6.66 |
HF-018 | 18 | DN80/Ro2" | 1149/847360/160 | E(Grade)-44-II | 51/6.92 |
HF-022 | 22 | DN80 | 1299x360 | E(Grade)-48-II | 54 |
HF-026 | 26 | DM80 | 1346x20 | E(Grade)-40-II | 2 | 75 |
HF-035 | 35 | DN80 | 1346x20 | E(Grade)-44-II | 75 |
HF-045 | 45 | DN100 | 1356x420 | E(Grade)-48-I1 | 81 |
HF-054 | 54 | DN125 | 1381x520 | E(Grade)-44-II | 3 | 118 |
HF-066 | 66 | DN125 | 1361x520 | E(Grade)-48-II | 118 |
HF-088 | 88 | DN125 | 1452x545 | E(Grade)-48-II | 4 | 153 |
HF-110 | 110 | DN150 | 1503x685 | E(Grade)-48-II | 5 | 158 |
HF-132 | 132 | DN150 | 17392728 | E(Grade)-48-II | 6 | 162 |
HF-154 | 154 | DN200 | 1800r750 | E(Grade)-48-II | 7 | 273 |
HF-200 | 200 | DM200 | 1800x750 | E(Grade)-48-II | 9 | 300 |
HF-220 | 225 | DN200 | 1800x750 | E(Grade)-48-II | 10 | 310 |
HF-250 | 250 | DM250 | 1920x1000 | E(Grade)-44-II | 14 | 370 |
Working conditions and technical indicators:Maximum work pressure of aluminum shell filter1.6Mpa14 Cube Frank filter maximum work pressure1.0Mpa maximum operating temperature is66ºC