Fully Atomatic Transformer Oil Filtration and Regeneration Equipment Zyb-a

Min.Order: 1

Product origin: Chongqing, China

Infringement complaint:

Complaint

US$ 3000 ~ 11000

Description

Fully Atomatic Transformer Oil Filtration and Regeneration Equipment ZYB-A

Application
Series ZYB-A adopts Programmable Logic Controller (P.L.C) to achieve the automation of whole treatment process. This machine is mainly used for regenerating the electrical insulating oil such as transformer oil, switch oil and mutual inductor oil, especially suitable for the regeneration of seriously deteriorated insulating oil.

Features
1.Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials such as the deep oxides, free carbon in the oil effectively. It can recover the seriously deteriorated oil to comprehensive index of anti-alkali and water-solubility etc.

2.Three ways of service: use only vacuum dewatering, degassing, removing impurities system; use only the regeneration system independently; and also can use both at the same time.

3.Programmable Logic Controller (P.L.C)

Advantages
It can not only removing the water, gas and impurities which mixed in the oil, but also can improve many values reach to the national standard such as the acid value, PH value. Meanwhile, it improves the voltagewithstand value through filtering the polarity materials like free carbon, deep oxides and so on.

Technical Parameters

Parameter		Unit	ZYB-A-20	ZYB-A -30	ZYB-A-50	ZYB-A -100	ZYB-A-150	ZYB-A-200
Flow rate		L/min	20	30	50	100	150	200
Flow Rate		L/H	1200	1800	3000	6000	9000	12000
Vacuum degree		Mpa	-0.06~-0.095
Vacuum pressure		Mpa	≤ 0.3
Temperature range		ºC	10~ 80
Normal working hour		H	≥ 4000
Continuous working hour		H	150
working noise		dB(A)	≤60	≤70	≤72	≤75	≤80	≤80
Heating power		kW	18	24	30	45	60	72
Total power		kW	22	28	35	50	68	80
inlet(outlet) caliber		mm	Ø25	Ø25	Ø32	Ø42	Ø50	Ø50
Weight		kg	400	450	600	800	850	900
Size	L	mm	1500	1600	1600	1600	1600	1700
	W	mm	900	900	900	950	950	1000
	H	mm	1550	1650	1700	1700	1800	1900
Index after filtering	Breakdown voltage	kV	≥70
	Moisture content	PPM	≤5
	Gas content	%	0.1
	Impurity size	μm	≤1(customizable)
	Value β	%	96
	Acid value	mgKOH/g	≤0.03
	Dielectric loss factor.	tgδ(90ºC)	≤0.001

Guarantee value

Breakdown voltage	kV	≥70
Moisture content	PPM	≤5
Gas content	%	0.1
Impurity size	μm	≤1(customizable)
Value β	%	96
Acid value	mgKOH/g	≤0.03
Dielectric loss factor.	tgδ(90ºC)	≤0.001

Detailed Image

Compoments in Details

Enclosed Type Available(Optional)

Working Process
1.When the oil machine is processing, under the difference of in-out oil pressure,
the oil entry into the pre-filter. And then the larger impurities is filtered.
2.The remaining oil goes into heater to exchange heater.
After heating, the oil in the low vacuum separator forms fog and then membrane which extend the contact area more than hundreds of times.
Under the high temperature, high vacuum, high pumping speed condition, the water in oil rapidly evaporates and pumps out.
3.The oil after dewatered and degassed pulls into secondary filer through the oil drain pump to separate the impurities.
4.By the working of pressure, the oil goes into fine filter.
The fine filter is made of composite microporous material which can effectively remove superfine particles in the oil.
5.The oil out flowed by outlet is the cleaned oil.
6.From so far, the whole purification process is completed.

About Us

Main Oil Purifiers
1.ZY series vacuum transformer oil purifier
2.ZYA series vacuum automatic transformer oil purifier
3.ZYB series vacuum transformer oil regeneration purifier
4.ZYD series double-stage vacuum transformer oil purifier
5.ZYD-I series ouble-stage transformer oil regeneration purifier
6.ZYD-M series trailer-mounted transformer oil purifier
7.TY series vacuum turbine oil purifier
8.TYA series vacuum lubricating oil purifier
9.TYB series coalescence-separation oil purifier
10.TYC series vacuum lubricating oil regeneration purifier
11.CYA series centrifugal oil purifier
12.TPR series waste engine oil recycling system
13.PL series plate and frame oil filter press
14.JL series portable oil purifier
15.BZ series transformer oil regeneration device

Trustable Technical and After-sale Service

Safe and Timely Transportation

*Standard export wooden case with high quality cushioning material ensures that the customers get the item in good condition.
*Carefully check every packing detail before delivery to avoid any troubles during the transportation.
*Appointed logistics company could be used according to customers demands.
* Do our best to make sure customers can get their goods in time.

Forward

Related products