Description
Product Description
01
High capacity
In a conventional SPC plant, it takes 4-5 extrusion lines to match a back-end slotting line, but our new 135 extrusion line can match a back-end slotting line with only 2 lines, which is almost twice the capacity of a normal extrusion line.
02
Excellent performance
Starplas's Series of Parallel Twin Screw Extruders is designed for greater output, superior performance and higher profits. High surface area,low shear screw designs for efficient heat transfer.
03
Advanced motor
The Newest WSZ-80 New Design Indoor Plastic SPC Flooring Extrusion Machine with 2 extruders of 80/156(include the 2 sets of Electric Cabinets),the motor is 75KW imported Germany SIEMENS,the max output is about 450kg/h
04
Flooring structure
Surface can be laminated with different design decoration film and sound insulation cushion layer can be laminaed at bottom side.
System Composition
| Conical Twin Extruder |
| Screw Material | 38CrMoAIA |
| Alloy Treatment | Nitriding treatment |
| Nitriding Depth | Screw0.5~0.6mm Barrel0.6~0.7mm |
| Hardness | ScrewHV740~940 Barrel HV≥860 |
| Roughness | Screw Ra≤0.8um BarrelRa≤1.6um |
| Gearboxand Distribution Box | Gear:20CrMoTiDistribution box:38CrMoAIA |
| Main Motor | Power 200KW AB Inverter AB Contractor UL Electronic. Cabinet UL standard for all motors |
| Screw Speed | 1~32rpm |
| Fan Power | 0.55KW*4 |
| Vacuum Device | 11KW Equipped with automatic feeding device |
| Automatic Shutdown Protection Device | Current overload and screw dislocation |
| T-Die |
| Outlet width | 1350mmm(to be confirmed with buyer) |
| Width of SPC slab | 960-980mm |
| Thickness range for product | 3-8mm |
| Structure | Coat hanger type |
| Material | 5CrNiMo mould alloy steel |
| Die lip flow surface roughness | 0.015-0.02 um |
| Chrome plate in the flow channel | 0.04-0.06 mm |
| Heating | Electrical heater |
| Heating zone | 7 zones |
| Fasten | By bolts |
| Total installation power | 36KW |
| Weight | 1000Kg |
| Roller Calender |
| Structure | "L" horizontal layout |
| Roller diameter | 450mm |
| Roller length | 1500mm |
| Roller raw material | Seamless steel tube |
| Treatment on roller | Quench and surface chrome plate |
| Hardness on roller surface | >HRC50 |
| Chrome plate thickness | 0.08-0.12mm |
| Mirror roller surface | Ra<0.025um |
| Bottom surface embossing | Embossed as Seller standard (diamond pattern) |
| Top surface embossing | Normal Pattern as buyer orderedEIR pattern as buyer orderedQuick change system |
| Movement motor | 0.75KW AC motor |
| Control | Siemens PLC and HMI |
| Program for EIR | Included |
| Electrical component | CE certified |
| Total installation power | 10 KW |
| Weight | 9500Kg |
| Lamination device |
| Platform | Included, column installed on the ground |
| Unwinder shaft | Four pcs |
| Air Shaft diameter | 3'' for printing film |
| Shaft length | 1500mm |
| Tension control | Magnetic powder brake, control by "Italy Re" auto tension controller |
| Deviation rectification control | Included |
| Unwinder Movement | on linear guideway |
| Lamination press roller | 120mm Silicon rubber rollers for printing film |
| Clamp by | Pneumatic cylinder |
| Total installation power | 0.55 KW |
| Weight | 1000 Kg |
| Cooling conveyor |
| Length | 18m |
| Width | 1500mm |
| Roller | Stainless steel roller |
| Air blower | 16 sets |
| Chilled air-cooling tank | 6m |
| Chilling capacity | 38000kcal/hr |
| Total installation power | 15KW |
| Weight | 1900 Kg |
| Trimming blade |
| Blade quantity | Two pieces |
| Trimming width on product | As per T-die width |
| Weight | 20 kg |
| Haul off |
| Type | Rollers pulling |
| Rollers quantity | one couples |
| Roller size | 1500mm |
| Roller diameter | 250mm |
| Roller | Rubber roller |
| Clamp | Pneumatic cylinder |
| Drive | AC motor |
| Transmission | Gears drive |
| Speed control | Frequency inverter |
| Speed range | 0-8m/min |
| Total installation power | 3 KW |
| Weight | 1000 Kg |
| Shear cutter |
| Cutting | Guillotine cutting |
| Cutting Max width | 1300mm |
| Cutting Max thickness | 3-8mm |
| Length counter | Included |
| Total installation power | 5.5KW |
| Weight | 800 Kg |
Services Provided
Technical Specification
| ltem | Parameters |
| Plastic Material for feeding | PVC / CaCO3 (1:2.5-3.2) |
| Product Width | 980mm/1350mm |
| Product Length | 610~3050mm |
| Product thickness | 4~6mm |
| Capacity of Extrusion line in weight | 1250-1600kg/hr30~38.4 Ton/day(24hours) |
| Capacity of one Extrusion line | 3000~4350 m2 per 24 hours for 4mm |
| Total Installation Power | 470 KW |
| Power in Consumption | 250-300KW per hour |
| Water flow | 120-160 L/min |
| Compressed air in Consumption | 0.3-0.5 m³/min |
Company Profile
FAQ
Q1: What you can offer to your customers?
A: We can provide our customers with professional equipment and excellent design and perfect service to ensure their smooth production.
Q2: How long is your delivery time?
A: 5-20days after order confirmed.Based on the item and quantity.
Q3: What's the MOQ?
A: 1 set.
Q4: Can you produce according to customers' design?
A: SureWeare professional manufacturerOEM AND ODM are both welcome.
Q5: Why should I choose your company?
A: We can provide our customers with high auality and high safety products.
We have a team of experienced skilled workers and engineers.
We can support overseas support.
We can customize the design.
We can provide after-sales service for our customers.
Complaint
