Touch LCD Display Underground Cable Fault Locator Factory Distance Test Tdr

Min.Order: 1
Product origin: Xi'an, Shaanxi, China
Infringement complaint: complaintComplaint
US$ 1230

Description



Product Introduction

XHGG501D cable fault tester meets the relevant requirements of "General Technical
Requirements for Special Testers for Power Equipment Part 1 Cable Fault Flash
Tester", and the test principle. Aims to provide professional and standard general
solutions.

XHGG501D cable fault tester is suitable for measuring low resistance, short circuit,
open circuit and disconnection faults of various materials of various materials with
different cross-sections and different media, high-frequency coaxial cables, local
telephone cables, street light cables, and buried wires, and High-resistance leakage
and high-resistance flashover faults.

XHGG501DFor cable fault rough distance measurement. Test method: low voltage pulse, high voltage flashover method(ICE, ARC Single shot)

------------------------------------------------------------------------------------------------------------------------------------------
Main Function

With distance, speed and resistance measurement function.
With Micro-printer can print out the wave form and measuring results
Automatic continuous sampling and never lose any discharge waveform.



-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Technical data
Location distance: ±20m(it should be noted that in reality, the location distance is affected by the following factors, the choice of medium, on-site measurement, and human analysis)
Dead zone: None
Accuracy of distance measurement:±1% 
Power supply: AC 220V+/-10% 50Hz



 
Display
Industrial grade 7"LCD display-viewing angle 160°.  SCM centralized control, touch operation mode, strong anti-interference ability;
Measuring methodflashover sampling, low-voltage pulse sampling
Pulse amplitude100Vp-p
Output impedance50 ohm
Pulse width0.1uS ...2uS
Measurement errorabsolute error of rough measurement: ±10m relative error of
rough measurement: ±1%
Power supply mode built-in 12V/5Ah DC power supply, which can work
continuously for 6 hours
Measuring distance15m ...30km
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Features

1. Industrial grade 8"LCD display-viewing angle] 160°, working temperature -25ºC~+65ºC;

2. SCM centralized control, touch operation mode, strong anti-interference ability;

3. It has the functions of distance measurement, speed measurement and resistance measurement;

4. Fully automatic continuous sampling, never miss any discharge waveform;

5. Test method: flashover sampling, low-voltage pulse sampling

6. Pulse amplitude: 100Vpp

7. Pulse width: 0.1uS and 2uS

8. Measuring distance: Smax: 30km; Smin: 15m

9. Measurement error: absolute error of rough measurement: ±10m relative error of rough measurement: ±1%
(DL/T849.1-2004 stipulates that it should not exceed ±(1%L+20)m where: L is the cable length)

10. Power supply mode: built-in 12V DC power supply rechargeable battery, which can work continuously for 6 hours
It can also be connected to AC 220V±10%  50Hz power supply
Charging in non-working state.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

System 






-------------------------------------------------------------------------------------------------------------







XZH TEST is professional manufacturer of underground cable fault location system, we provide wholelife technical support, welcome you contact us for more service~
 

Our team


Product Tag:
Related categories:
Scroll to Top