Max. pulling load element LOAD | 5 tons | |||||
Test space | Test width approx. 1000 mm. | |||||
Resolution | 1/100,000 | |||||
Unit switching | All common international units can be switched at will | |||||
Pulling pressure accuracy range | ±1/10000 | |||||
Office chair foot pressure tester test speed | computer-controlled non-stage volume, maximum speed 0.01~300mm/min | |||||
Displacement decomposition degree | 0.001mm | |||||
Can do stress, strain, and display the curve, holding pressure, tension | ||||||
Size of lower platen | 900*900mm | |||||
Effective space between upper and lower platen | 900mm, protective cover around | |||||
Protective device | 1. With up and down stroke control switch, programmable maximum load, maximum extension, automatic stop emergency switch. 2. The drive motor is a servo motor, completely controlled by computer for speed and travel, unlike traditional AC and DC motors which are controlled by voltage and need to be controlled in different sections. | |||||
Protective cover | ||||||
Weight | approx. 265 kg |
Transmission coupling plate | Forged of high carbon steel, with good mechanical strength properties and no variation in the amount of travel. | |||||
Drive screw | Tempered with SUS high carbon steel, TM55 x 5 accuracy, trapezoidal screw. | |||||
Fixture treatment | All fixtures are treated with hard chrome plating. hrc55 or above. | |||||
Guide bar | Made by two Φ50 Korean Taekyung guide rods with high frequency and hard chrome plating treatment on the surface, HRC60 or above. | |||||
Active bearing | Adopted Japan NSK high carbon bearings. | |||||
Drive Chain | Made of Carbon steel 5 points double row chain drive. | |||||
Body structure | Adopt the split design of main frame and control box. | |||||
Speed Reducing Device | Italian Ortes precision hollow cast aluminium reducer I=1:40. | |||||
Dust protection device | Adopting Taiwan dustproof cover to protect the filament rod from dust to ensure the life and accuracy of the filament rod. | |||||
Surface treatment of the machine body | Adopt American Dupont powder, electrostatic spray painting process, by high temperature 200 ºC curing to ensure that the colour will not fade. | |||||
Total weight | about 800KG. | |||||
Total power supply | 1.5KW AC220V 50H |