Complaint
Grp water tank is the abbreviation of fiberglass Reinforced Plastic water tank. It can also be called FRP water tank, SMC water tank, SMC panel tank. The panel is molded by SMC(sheed molding composite material) under high temperature and high pressure. SMC is a glass fiber reinforced plastic, which is a mixture of unsaturated polyester resin and impregnated reinforcing materials, fillers and glass fibers. According to the needs of customers, it can be hydraulically pressed into panels of different sizes and thicknesses. The water tank adopts reinforced support, and its steel parts are hot galvanizing parts or stainless steel parts.
Product Features:
the selection of plate thickness is based on the pressure and position of the plate, including 5mm, 8mm, 10mm, 12mm, 14mm, 16mm, etc.
The characteristics of light weight and high strength make the weight of FRP plates of the same size and thickness about 30% lighter than that of steel plates.
It is sectional structure and assembled by panels among 1000x1000mm,1000x500mm,500x500mm three sizes,customized according to the requirement.
The molding method increases the strength of earthquake resistance and impact resistance, overcomes the defect of uneven strength of traditional water tanks, and improves the compressive strength and service life.
No leakage, no deformation, convenient on-site assembly and construction, convenient maintenance and overhaul.
Scope of Application:
storage and regulating water tank of building water supply;
fire water tank, expansion and condensation water tank of heating system;
temporary water storage tanks such as construction, Geological Survey, industry and national defense engineering;
hospital, bath center, Agriculture, climate-drought region and other fields.
| Material | GRP/FRP/SMC |
| Size | 1x1m, 1x0.5m, 0.5x0.5m |
| Panel Shape | Square shape |
| Thickness | 4-16mm |
| Remarks | Thickness Tolerance: ±0.2mm |
| Volume | From 1m3 to 1000m3 |
| COLOR | White,Blue,and so on |
| SMC water tank physical and chemical properties | ensile strength (Mpa)≥60 |
| Bending strength (Mpa)≥100 | |
| Bending modulus (Gpa)≥7.0 | |
| Pap hardness≥60 | |
| Bibulous rate,%≤1.0 | |
| Glass fiber content,%≥25 | |
| Leakage | No leakage after filled with water |
| Full of water deformation | Filled with water, wall maximum deformation after no more than 1.0% of the tank bottom center height, no more than 10 mm maximum deformation |
| Water quality | Accord with GB5740 |
| Packaging Detai | Product packaging by the standards of each country. |
| Delivery Detai | Water tank leadtime within 30days |
Our service
1.Our quality guarantee
The water tank has one year's guarantee. If any problems,our technician will figure out ,according to client's feedback. Parts will be replaced for free if caused by quality fault.
2.Fast delivery time save your efficiency
For standard size water tank it would be 7-10 days
For customized size water tank it would be 15 -30 days.
Try order is acceptable. Sample is available.
