Complaint
M asimo 1859 LNCS Adtx Adult SpO2 Adhesive Sensors are sensors for patient use. The main method of use is to clamp it on the finger, and the first choice is the middle finger or ring finger that is not often used by patients. The main function of M asimo 1859 LNCS Adtx Adult SpO2 Adhesive Sensors is to measure the patient's arterial hemoglobin functional oxygen saturation (SpO2) and pulse rate (measured by the SpO2 sensor) for continuous non-invasive monitoring. It is a very practical device in the medical environment, and can be used in hospitals, medical places, mobile environments, and even in home environments.
M asimo 1859 LNCS Adtx Adult SpO2 Adhesive Sensors produced by our company need to be professionally disinfected by professional medical personnel before use. However, it cannot be soaked in any solution, otherwise the sensor may be damaged; and it cannot be sterilized by radiation, steam, high pressure or ethylene oxide. Therefore, you need to be extra careful and pay attention to some details when using it, otherwise it will affect the use of the sensor and even cause some serious accidents.
| Preconditioning Parameters | |
| Temperature | 54°C |
| Relative Humidity | 40% |
| Vacuum Set Point | 1.3 psia |
| Preconditioning Time | 30 minutes |
| Sterilization Parameters | |
| Temperature | 54°C |
| Relative Humidity | 40% |
| EO Concentration | 600-750 mg/L |
Please kindly contact me, if you are interest in M asimo 1859 LNCS Adtx Adult SpO2 Adhesive Sensors Equipment. Thank you for your time.
