Complaint
1.Safety The vertical blade and triangular double fulcrum design are adopted, and the main stress points are concentrated in the hub, so the problems of blade falling off, fracture and blade flying out have been better solved. 2. Noise Horizontal plane rotation and blade design based on the principle of aircraft wing are adopted to reduce the noise to a level that can not be measured in the natural environment. 3. Wind resistance The integral blade is made of aluminum alloy, and the design principle of horizontal rotation and triangular double fulcrum makes it less subject to wind pressure and can resist super typhoon. 4. Turning radius Because of its different design structure and operation principle, it has smaller turning radius than other forms of wind power generation, saves space and improves efficiency. 5. Generation curve characteristics The starting wind speed is lower than that of other types of wind turbines, and the rise of power generation is relatively gentle. Therefore, within the wind speed range of 5 ~ 8m, its power generation is 10% ~ 30% higher than that of other types of wind turbines. 6. Utilization wind speed range The special control principle is adopted to expand its suitable operating wind speed range to 2.5 ~ 25m / s, obtain greater total power generation while making maximum use of wind resources, and improve the economy of wind power equipment. 7. Braking device The blade itself has speed protection, and can be equipped with mechanical manual brake and electronic automatic brake. In areas without typhoon and super gust, only manual brake can be set. | ||||
Model | ENM-WT01-500W | Generator type | three phase AC permanent magnet (outer rotor) |
Rated power | 500W | Blade material | compound material |
Rated voltage | DC 12V/24V | Motor weight | 7kg |
Blade height | 1.1m | Net weight | 18kg |
Overall height | 1.25m | Gross weight | 20kg |
Rotation diameter | 0.52m | Package size | L 1140mm * W 530mm * H 375mm |
