Complaint
Products Advantages:
1. Abundant the introduction of Japanese production equipment and advanced technology.
2. Daming oil is silicone oil which damping function is stable when the machine temperture reach from above 80 degree.to below 20degree. And we buy the silicone oil from Japan.
3. Our damper life time can be used 50,000 time.
4. The damper had approved the ISO9001:2008and RoHS certification.
5. 100% products tested before delivery it.
6. Free sample can be send to you for test at first.
This is equivalent to the product of the ACE, FYN-P1, FYN-N1
Construction size Ø 20 mm
Construction size Ø 18.5 mm
vane dampers and dashpots are used to dampen drives, control speed, and many other applications. Our rotational viscous dampers are maintenance free and the most durable units on the market. Silicone oil viscous dampers are available in either fixed rate or adjustable models. On adjustable vane dampers adjustment is made with an integrated set screw.
The damping direction of the vane dampers with continuous rotation can be clockwise, counter clockwise, or in both directions. In vane dampers with continuous rotation, a fluid damping is produced by the shearing or braking force of silicon fluids resistance between the surfaces of a rotor and a stator. The damping moment is determined by the viscosity of the fluid and the size of the orifice or gap. The damping characteristics can be customized by changing the viscosity of the silicon fluid or by changing the structure of the rotor and stator. vane dampers life-cycles are typically in excess of 50,000 cycles. The service life may be significantly higher or lower, depending on the application. After extended life cycles the dampers still produce over approx. 80% of their original damping moment.
1.General
This specification give the related model damper technical requirement, testmethod and product model description, apply to damper production and test.
2.Test requirement and test method
| item | desctiption | Technical requirment | Test method |
2.1 | Damping time | Damping time:8±4s | 1.Test machine:test special tools 2.method:T=3.5N-m(35kgf-cm) make the counterpoise position at 0,the reset.(once is ok)a.pull the counterpoise to110position,then to 90~80(85is best),measure the working angle from 70 to 0 degree b.load torque in horizontal line:3.5N-m(35kgf-cm) c.test angle:70→ 0 d.test temperarure:23ºC±2ºC |
| 2.2 | durability | 1)working angle more than 2 seconds 2)no oil leakage, no broken | 1)durability test condition a.test machine:test special tools(drop free) b.test method:force close open angle to close angle 100±10. c.force close:pneumatic pressure 30~50PSI d.working angle:0←→110 e.frequency 10 time/minutes f.test temperature:23ºC±2ºC g.durability time:50,000cycles 2)judging criteria after test a)working angle:after test, put damper at room temperature 23ºC±2ºC more than 24 hours,test it according to item 2.1 and get the damping time b)appearance:judge the appearance |
| 2.3 | Working temperature range | 1)-5ºC:10 ± 5s 2)50ºC:6 ± 3s | 1)working temperature test condition a.damper place temperature:-5ºC,50ºC b.damper place time:>3 hours 2)judging criteria after test place the damper in each temperature, and then put in room temperature, test it according to item 2.1 |
| 2.4 | Storage temperature | 1)damping time change rate in preliminary stage within±30% 2)no oil leakage, no broken | 1)storage temperature test condition a.damper storage temperature:-20ºC,60ºC b.damper storage time:72hours 2)judging criteria after test a.damping time, place the damper in each temperature and then put in room temperature, test the damping time according to item 2.1 b.Appearance: judge the damper appearance. |
| 2.5 | Reverse torque | <1.0N-m(10kgf-cm) | 1)rotate speed:1rpm 2)test angle:110° 3)method:make the damper rotor rotate to oppsitive direction. Test its torque. |
| 2.6 | Maximum working angle | 110° | Guarantee item 2.2 durability working angle range |
| 2.7 | size | See drawing | |
| 2.8 | weight | 25g±1g | |
| 2.9 | rotation | White cover left, black cover right |
Soft-close:
Just one fingertip touch, the lid close all by itself. Gently and silently, like the snow falling down in Christmas Eve.
Quick-release:
Click the button, lift off the lid, just two movements without using any tools put an end to annoying disassemble procedure.
Easy Clean:
Release the seat & cover, clean the hinges and pan with warm water and a mild detergent. Afterwards rub dry. Dont use any caustic or scouring agents. This design is for highest hygienic safety
Welcome to purchase high quality and precise hydraulic damper with zinc alloy metallic rotor, vane damper, soft close damper from Tianyun Industry - one of the leading such manufacturers and suppliers. We have been specialized in this field for over 20 years. And we offer customers the most competitive price. Don't hesitate any more.
