Type | FGS1000- 48V | FGS2000-48V | FGS3000-48V | FGS4000-48V | FGS5000-48V | FGS6000-48V | ||
Battery rated voltage | 48VDC | |||||||
Wind turbine rated power | 600W | 1000W | 1000W | 1000W | 1500W | 1500W | ||
Solar panel rated power | 400W | 600W | 600W | 600W | 600W | 600W | ||
Max charge current | 33A | 43A | 48A | 54A | 60A | 75A | ||
Under voltage | 43.2VDC | |||||||
Under Voltage recover | 52.8VDC | |||||||
Over-voltage | 64.8VDC | |||||||
Over-voltage recover | 62.4VDC | |||||||
Rated output current | 3.6A | 7.3A | 10.9A | 14.5A | 18.2A | 21.8A | ||
Rated output power | 1000VA | 2000VA | 3000VA | 4000VA | 5000VA | 6000VA | ||
Impulse voltage range | <53.2VDC | |||||||
Straight voltage range | 53.2VDC<battery voltage<55.2VDC | |||||||
PWM voltage range | 55.2VDC<battery voltage<58.0VDC | |||||||
Loader voltage range | 55.2VDC<battery voltage<58.0VDC:PWM unload Battery voltage>58.0V:complete unloading | |||||||
Output waveform | Pure sine wave | |||||||
Output frequency | 50.00Hz | |||||||
Inverter efficiency | >90% | |||||||
Output waveform | < 5.0% | |||||||
Overload protection | >110%rated current 1min';>150%rated current 20S;>180%rated current 5s;>200%rated current 0S. | |||||||
Environment | Temperature:-10ºC~40ºC; Humidity: <95% non-condensing; avoid direct sunlight | |||||||
Size | See Instructions |
System Module:
1. wind and solar complementary control module
2. Sine wave inverter control module
The two modules independent of each other and complement each other