Complaint
Seawater Desalination Machine Performance Characteristics
1. Using ozone disinfection device, the disinfection effect is good;
2. Imported reverse osmosis membrane, reliable quality, long service life, low energy consumption and stable effluent quality;
3. It adopts imported automatic control valve and microcomputer control component, fully automatic operation, simple to use, safe and reliable operation;
4. The water-passing parts are made of stainless steel, FRP, etc. The water storage parts are fully sealed stainless steel water tanks. The water supply equipment uses stainless steel pump frequency conversion water supply, which is not only corrosion-resistant and durable, but also clean and hygienic, and will not cause secondary pollution to water. After the water that cannot be used by the pipe network flows back to the clean water tank, it must be activated again, and then it will be supplied to the user after disinfection, completely eliminating the stagnant water;
5. Modular design, water, water storage, water supply, cleaning, organically designed into one, easy to install and use;
6. Water production: 0.2-100m3/h, water production rate 50-75%;
Working Process of Seawater Desalination RO System
Raw water pump→ mechanical filter(quartz sand filter)→ activated carbon filter→sodium-ion exchanger
(water softener)→ security filter→ high pressure pump →Reverse osmosis→ Ozone sterilizer (UV sterilizer)
How a Reverse Osmosis System Works?
Reverse osmosis (R/O) is a water treatment process in which water is forced through a semi-permeable membrane that has very small holes or "pores". RO performs a separation without a phase change. Thus, the energy requirements are low.RO systems are compact, and space requirements are less than with other desalting systems, e.g. distillation.
Reverse Osmosis works by using a high pressure pump to increase the pressure on the salt side of the RO and force the water across the semi-permeable RO membrane, leaving almost all (around 95% to 99%) of dissolved salts behind in the reject stream.
Solution Design of Containerized Seawater Desalination Equipment
| Pre-treatment | Feed water pump, Stainless steel 316L | Provide prssure for filters; |
| Quartz sand filter | Remove suspended particle and large impurity. In this system; | |
| Active Carbon Filter | Remove the color, free chloride, organic matter, harmful matter, ect; | |
| Anti-scalant system | To add chemicals to remove some impurities and prolong thememebranes using/washing time(prevent membrane blocking) | |
| Manual/Auto control valves | Flushing sand/carbon filter after some time | |
| Security filter | Remove larger than 5 micro colloids in the water. In this system | |
| Seawater RO Main Part | High pressure pump, Stainless steel 316L | Provide the high pressure to RO membrane; |
| Ro membranes | More than 98% desalination rate, can remove ions except H2O. | |
| CIP washing system | To washing the membranes when it is blocked after using for long time | |
| Electronic system | PC controller or PLC controller |
Reverse Osmosis Membrane Element
It is mainly responsible for removing soluble salts, colloids, organic matter and microorganisms in water. It can remove more than 97% of ions in water, and can also effectively remove TOC and endotoxin, with a TOC removal rate of 90%.
Model | JFRO-300T |
Host Size | 3000x1000x1700mm (can be customized) |
Power | 11KW |
Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
Operating Pressure | 1.2~1.5MPa |
Recovery Rate | 70% |
Designed Water Inlet | 14t/h |
Outlet Flow | 10t/h |
Desalination Rate | ≥99.5% |
RO Frame | SUS304 |
Membrane Size | 8040 |
Membrane Elements | DOW /Hydranautics/Troy/ Vontron (Optional) |
Number of Membranes | 10 |
Raw Water Pump | CNP/NYP (Optional) |
High Pressure Pump | CNP/NYP (Optional) |
Tank Material | SS/FRP(Optional) |
Control Valve | Manual/Automatic |
Control Valve Brand | FLECK/RUNXIN |
Membrane Housing | FRP |
Number of Membrane housing | 5 |
Pipe Material | U-PVC/ Stainless steel (Optional) |
https://xajufu.en.made-in-china.com/Solutions/
Reverse Osmosis Membrane Element
It is mainly responsible for removing soluble salts, colloids, organic matter and microorganisms in water. It can remove more than 97% of ions in water, and can also effectively remove TOC and endotoxin, with a TOC removal rate of 90%.
Product Advantage of 6T Seawater Desalination RO System
1. Easy to use. Continuous operation and water production, high degree of automation;
2. No need for chemical regeneration, easy to operate and maintain;
3. Quality assurance. The RO system adopts imported DOW membrane from the United States;
4. Automatic switch machine. Automatically turn on when there is no water, and automatically turn off when there is no water or full of water;
5. Automatic cleaning. The RO membrane is automatically cleaned to reduce the pollution speed;
6. The low pressure switch protects the high pressure pump from being damaged due to water failure;
7. Water quality monitoring. Continuous online monitoring of water quality with conductivity meter for production water;
8. Input the water and concentrated water pressure gauges, monitor the RO pressure difference, and remind the washing time.
How to Choose the Apposite Seawater Desalination Machine?
1. First you can tell us what your raw water source is.
2. What kind of water quality requirements you want to achieve.
3. How many liters you need for this RO device.
4. Any questions you don't understand, you can consult us at any time, we have an excellent team of engineers.
5. We also offer you OEM service. We can design the machine according to your requirements, such as material, power, etc. At the same time, our engineers will give you our professional advice.
https://xajufu.en.made-in-china.com/contact-info.html
