Evaporative Condenser 360 Degree Spray Nozzle Plastic Cooling Tower Nozzle

Cooling tower spray nozzles are designed for optimum coverage of either the fill or coil surface. Optimum coverage increases thermal efficiency while fully wetting the surface. This in turn prevents scale build-up that will lessen the unit capacity. There are several designs for pressurized and gravity-feed systems, each fully optimized for the application. Regardless of design, nozzles are easily removed, either to accommodate new flow rates or to replace broken nozzles. To facilitate cleaning or replacement; counterflow nozzles are installed using grommets which also allows the nozzles to be properly positioned. Kits are available, complete with insert grommets for pressurized systems or installation tools for gravity systems.

Cooling Tower Spray Nozzle Working Principles

Working fluid flowing inside of the cooling tower nozzle coils, which is enwrapped by spray water on the outside. 
The heat of water is transferred by coil and become the saturated vapor when the water flow meet with the air flow.The heat is exhausted out of the cooling tower by the top fan; then the water is collected back into the bottom cooling tower basin and circulates continuously.
The spray water is cooled down via PVC radiation fin in the process of circulation, and flows the same direction with the fresh wind. The coil mainly takes sensible heat travel style. The most benefit of this style is can avoid scale formation on the outside of the coil. And this will apply especially to dealing with high temperature fluid (e.g. 60°C) or the fluid need big temperature difference (e.g. 60°C to 35°C).
  

Features and benefits of cooling tower nozzle

Secured in grommets for easy removal and replacement.
Preventing scale build-up that reduces the unit capacity.
Large orifice 360° umbrella pattern spray, eliminating dry spots.
Non-clogging design.
For all system flow rates.
For pressurized or gravity distribution system.

Caution tip
When cleaning cooling tower water mist spray nozzles do not use a screwdriver or other instrument to force debris through the cooling tower nozzle. The bottom of the nozzle is a target area that diffuses the water over the fill or coil in an umbrella type pattern. If the target area is broken, the water will pour straight onto the coil-fill surface, possibly causing damage to the fill and/or dry spots on the coil. In addition, the debris can now possibly begin to clog the fill.

 

Qinghui produce all kinds of specification,style ABS nozzle,low price and fine quality,spot supplies.Cooling tower ABS nozzle,three splashed sprinkler,closed nozzle,reflection type nozzle,sewage nozzle and so on.

 

Q: Are you trading company or manufacturer ?
A: We are manufacturer with our own factory.

Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. Or it is 5-7 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge. And the freight cost will on the buyer's side.

Q: What is your terms of payment ?
A: Payment<=USD1000, 100% in advance. Payment>=USD1000, 30% T/T in advance ,balance before shipment.