USB to Hi-Speed SPI/I2C/JTAG Serial Adapter Cable w/Embedded Electronics, LEDs, 5V

USB 2.0 Hi-Speed to MPSSE Cable (SPI/I2C/JTAG master) with 5V digital level signals.

•  Data Rates: 30 Mbps
•  
•  USB Speed: High Speed (480MBps)
•  
•  Interfaces: MPSSE
•  
•  USB Connector: Type A
•  
•  End Connector: 10 way 0.1" female pin headers
•  
•  Cable Length: 0.5m
•  
•  Cable Details: 10 core, 6.5mm UL2464 24 AWG
•  
•  Packages: N/A
•  
•  Channels: 1
•  
•  I/O Voltage: 5V
•  
•  USB Class: FTDI Drivers
•  
•  Virtual Com Port: Yes
•  
•  Max Power Output: +5V / 450mA
•  
•  FTDI Internal IC: FT232H
•  
•  Operating Temperature: -40°C to +85°C

The C232HM-EDHSL-0, USB to MPSSE cable, is capable providing a USB to SPI, I2C or JTAG interface.

USB to MPSSE cable with +3.3V digital level signals. Maximum output of 200mA @ 3.3VDC on VCC

This is accomplished by the MPSSE within the FT232H device which has the ability to emulate synchronous serial protocols while handling all the USB signalling and protocols.

To expedite application development, FTDI has provided libraries which handle the MPSSE commands to emulate several protocols.

NOTE: use of the MPSSE libraries requires that FTDI's D2XX drivers are installed.