Complaint
Water-cooled handheld laser welding machine
It belongs to fusion welding, which uses laser beam as energy source to impact on the weldment joint.
The laser beam can be guided by a planar optical element (such as a mirror), and then projected onto the weld with a reflective focusing element or lens.
Laser welding equipment and products
Laser welding equipment and products (17 sheets)
Laser welding belongs to non-contact welding. The operation process does not require pressurization, but inert gas is required to prevent oxidation of the molten pool. Filler metal is occasionally used.
Laser welding and MIG welding can form laser MIG hybrid welding to achieve deep penetration welding, while the heat input is greatly reduced compared with MIG welding.
| Items | Parameter |
| Equipment Name | Handheld fiber laser welding machine |
| Laser Power | 1000W,1500W |
| Laser Wavelength | 1070 NM |
| Fiber Length | Standard 10M Maximum 15M |
| Work Way | Continuously modulated |
| Water Chiller | Industrial thermostatic water tank |
| Working Environment Temperature | 15~35 ºC(Low temperature needs to add antifreeze) |
| Working Environment Humidity | Working Environment Humidity |
| Suggested Welding Thickness | less than 4mm (depends on the thickness and materials) |
| Welding gap requirement | ≤1.6mm |
| Working Voltage | 220V/380V 50Hz |
| Weight | 150 KG |
| Size | 90*75*45cm |
| Power | Stainless steel | Carbon steel | Galvanized plate |
| 500W | 0.5-0.8mm | 0.5-0.8mm | 0.5-0.8mm |
| 800W | 0.5-1.2mm | 0.5-1.2mm | 0.5-1.0mm |
| 1000W | 0.5-1.5mm | 0.5-1.5mm | 0.5-1.2mm |
| 2000W | 0.5-3mm | 0.5-3mm | 0.5-2.5mm |
Features for handheld laser welding machine
1. It is easy to operate without professional welding technical experience. It can be started after 2 hours of simple training.
2. The welding speed is super fast. One hand-held laser welder can basically replace the output of 3 to 5 ordinary welders.
3. Welding can basically achieve no consumables and save costs in production.
4. After welding, the weld seam is bright and white, basically without grinding.
5. The laser welding machine has concentrated energy, small thermal reflection range, and the product is not easy to deform.
6. The laser welding machine has concentrated energy and high welding strength.
7. The energy and power of the laser welding machine are controlled by an intelligent operating system, which can meet various welding requirements, such as full penetration, penetration, spot welding, etc.
8. The photoelectric pollution of hand-held laser welding is small, and the volatile matter can be ignored. It is very friendly to the environment and operators, and will not cause additional physical burden.
Usage of hand-held laser welding machine
I. Startup preparation
Before starting the machine, please check whether the power supply and air supply are normal, and whether the welding gun head is correct and free of dust.
II. Start up
The starting sequence of the hand-held laser welding machine is to turn on the emergency stop switch first, then turn on the machine power supply, system power supply, and laser power supply in turn. Please wait 30 seconds for the water tank to fully rotate,
III. Welding preparation
Turn on the air source switch and set the laser parameters to be set on the control panel. After preparation, find one material to be welded for trial welding.
IV. End of welding
When the welding is completed, first turn off the laser power supply, then turn off the system power supply and the machine power supply in turn. The welding gun head should be coiled on the equipment.
We support ship by air and sea.
Will pack laser welding machine with foam and dust film first, then pack it with woodon box.
Q:What are the advantages of laser welding machine compared with traditional welding?
A:Small deformation, beautiful welding, fast speed, maintenance free, grinding saving and quick operation.
