Complaint
Features:
• Equipped with conductivity detector to quantify TOC concentration.
• BK-TOC1700 is able to work under on-line mode to realize real-time monitoring
• Ideal choice to measure and monitor microelectronics water, purified water, water for injection, etc.
• Automatic sample introduction with one-button setting, no sample contamination, no harm on operator and environment
• UV oxidation by UV lamp, no need to add acid, gas or catalytic, greatly reduces the experiment and maintenance cost
• 7 inches touch screen with smart UI, easy to operate and read test data
• In compliance with FDA-21 CFR Part11 requirements and USP, EP, JP and CHP
• Auto sampler is optional according to different experiment requirements
• Online and offline mode can be easily switched. (BK-TOC1700)
• 8GB large storage capacity, no restriction of data and time
• Quick test, each analysis takes less than 3 minutes
• All historical records can be traced by searching test date
• Data can be retrieved and saved to USB directly
• Equipped with Bluetooth printer for quick and easy data printing
• Modular design for quick installation and easy maintenance
| Model | BK-TOC1500 | BK-TOC1700 |
| Work Model | Offline | Online and offline |
| Detection Range | 0.001~1.5mg/l | |
| Detection Limit | 1ppb | |
| Max Tolerance | ±5% | |
| Analysis Time | 3 min | |
| Response Time | Within 10 min | |
| Sample Temperature | 1~95°C | |
| Sample Flow Speed | 3ml/min | |
| Repeatability Tolerance | ≤3% | |
| Drifting | ±5% | |
| Environment Temperature | 10-40ºC with temperature change±5ºC/d | |
| Relative Humidity | ≤85% | |
| Power Supply | AC 220V, 50/60Hz (Standard); AC 110V, 50Hz (Optional) | |
| Consumption | 100W | |
| External Size(L*W*H) | 440*220*300mm | 440*220*405mm |
| Net Weight | 11kg | 12.25kg |
| Package Size(L*W*H) | 610*470*405mm | 640*490*440 mm |
| Gross Weight | 16kg | 18kg |
Features:
• Equipped with signal management system to realize accurate online setting, real-time monitoring, self-testing and flow speed controlling, also ensures perfect device performance and experiment safety
• Low current system design highly ensures the safety of operators
• Temperature can be set according to different samples which ensures complete sample digestion
• The power of cooling module can be set according to sampling volume which improves drying performance, also prohibits wet gas damaging the NDIR detector.
• Automatic leakage checking system not only avoids mis-operations also improves device performance and operation safety.
• Flow rate controlling system avoids the influence of flow rate fluctuation which ensures more accurate data
• TOC detector with 24 bits data solution extends monitoring range. Controlling system with 32bin processing technology greatly improves device performance
Model | BK-TOC2000 | BK-TOC3000 |
Method | Dry method | Wet Chemical Oxidation By UV |
Digestion Mode | High Temperature Combustion | / |
Detector | NDIR | |
Parameters | TC, TIC, TOC, NPOC | |
Gas Requirement | Oxygen ≥ 99.995% | Nitrogen ≥ 99 995% |
Measurement Range | 0~30000mg/l (ppm) | 0~10000mg/l (ppm) |
Detection Limit | 50µg/l (ppb) | 5µg/l (ppb) |
Operation Mode | PC software Controlled | |
Application | Liquid Sample | |
Repeatability | 3% | |
Maximum Salinity | 85g/l | |
Power Supply | AC 220V, 50/60Hz (Standard); AC 110V, 50Hz (Optional) | |
Consumption | 200W | |
External Size(L*W*H) | 460*430*450mm | 460*360*450mm |
Net Weight | 28kg | 25kg |
Package Size(L*W*H) | 820*570*680mm | 660*610*680 mm |
Gross Weight | 52kg | 45kg |
