Walk-in Temperature Humidity Chamber Constant Temperature Wet Laboratory

Min.Order: 1
Product origin: Shanghai, China
Infringement complaint: complaintComplaint
US$ -1

Description
Walk-In Temp Humidity Chamber constant temperature wet laboratory

Step-in high and low temperature test box is a necessary test equipment in the new energy industry. It can carry out high temperature, low temperature, temperature cycle, rapid temperature change, high and low temperature alternating humidity and heat test according to IEC60068, MIL-STD-81OF, GJB150A, GB2423 and other standards.

Its characteristics are as follows:

1.It can adopt integral structure or combination of reservoir plate units, the content area can be arbitrarily expanded and easy to disassemble and assemble
2.The insulating layer adopts high-strength polyurethane (PU) foaming and high-density glass fiber cotton, which can avoid energy loss
3.Multilayer filtration and water replenishing device and automatic water replenishing device. There is no need for manual water addition and automatic water scarcity protection.
4.Cases are equipped with test holes, which can be used for external test power lines or signal lines;
5.Modular refrigeration units can ensure manufacturing quality, and maintenance and replacement are very convenient;
6.Low temperature and continuous effective operation for 1000 hours without frost, and temperature does not return. Rise.
 
 Control method and characteristics:
Precision microcomputer control temperature and humidity system, with PID control the refrigerant flow to make the system's heating / humidification reduction, to achieve low power consumption, energy saving, carbon reduction effect, cooling, heating, humidity control intelligent electronic control, long-term stable use.

 
Optional accessories:
1. Cable Port: Two size of cable port is available: &50mm, &100mm.
2. Double door
3. Pass room: Provided to avoid disturbance of atmospheric temperature and humidity while opening the door.
4. Floor reinforcement: Can be fixed if heavy specimen placed in the chamber for test.
5. Carry-in inclined platform: Provided below the door to facilitate moving of specimens in and out through the door.
6. Entire ceiling blow-out duct
7. The extremely wide air inlet reduces the airflow rate (down to apprrox.0.5m/s)
8. Dehumidifier
9. The rotation regenerating dehumidifier (M-300)ensures precise control of low humidity     (21°C,23%RH)for electrostatic reliability tests.
10. Temperature and humidity recorder
11. 100mm width recording paper with 6 dots
12. 180mm width recording paper with 12 dots
13. Status indication lamp
14. Provide to signal chamber status and warnings when normal running, a malfunction running or stand by occurs.
15. Water purifier
16. Provided to keep the humidifier heater free from scale and ensure the supply of water to humidifier.
17. Power socket


 Product parameters:
ModelBT-K-A
Volume10m3  , 15m3 ,  20m3,  30m3,  50m3,  100m3 , as per customer requirements
Temperature range-65  °C ~+80 °C
Humidity range20%~95%R.H.
Accuracy/uniformity±0.1 °C , ±0.1%R.H. / ±1.5 °C ,±5.0%R.H.
Accuracy/volatility±1.0 °C , ±2.0%R.H./±0.5 °C , ±3.0%R.H.
Cooling time5.0 °C /minute
Inside materialSUS#304   Stainless Steel
Insulation materialHigh-temperature high-density amino acid ethyl ester foam insulation materials,
Cooling systemWater-cooled / two-stage compressor
ProtectionNo fuse switch, compressor overload switch, high and low pressure protective switch, over-humidity-temperature protective switches, fuses, warning system
Accessoriesrecorder(option), view window, 50mm diameter testing hole, PL lamp, clapboard, Dry and wet gauze ball
ControllerGerman Siemens PLC or TH-900C Korea or TEMI
CompressorFrance's Tecumseh Brand or Germany Brand
Power1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz
 
Application

Walk in Environmental Chamber Temperature Humidity Test Chamber can be used to analyze and evaluate the property and performance of the batch elements and parts or machine sets under simulated conditions, and can also be used in experiment and production.


FAQ
1. Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally,
we offer 12 months for the FREE maintenance, while considering of sea transportation,
we can extend 2 months for our customers.
If your machine doesn't work, you can send E-mail to us and we will try our best to find
the problem by email or skype video chat if neccesary. After confirmation of the problem,
we can send you new spare parts or provide on-site repair.
 
2. What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery 

time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider 
making a special arrangement for you.
 
3. Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized 

machines according to your requirements. And we can also put your logo on the machine.
4. How to install and use the product?
We will send you operating instructions, English  video by Email. Or you can download on our

officail website directly.
Most of our machine is shipped with a whole part, which means it is already installed, all you
need to do is to connect the power cable and start to use.  And if possible, we can also install
your machine at site.

Factory information

Certification


Packaging and delivery


Production process
Product Tag:
Related categories:
Scroll to Top