(1)Lightweight design, easy assembly
The weight of a single box is only 7.5KG, which can be easily assembled by one person.
(2)Four-level energy-saving technology
Level I dynamic energy saving: when the signal is not displayed, the part of the drive circuit of the constant flow tube chip is turned off;
Level II black screen energy saving: when the display screen is completely black, the static consumption current of the chip drops from 6mA to 0.6mA;
Level III full-screen energy saving: when the low level is maintained for 300ms, the static consumption current of the chip drops from 6mA to 0.5mA;
Level IV shunt power supply step-down energy saving: the current first passes through the lamp bead, and then to the negative electrode of the IC, so that the forward voltage drop becomes smaller, and the conduction internal resistance also becomes smaller.
(3)Real color, high-definition visual display
The refresh rate reaches 3840Hz, the contrast ratio can reach 5000:1, and the grayscale is 16 bit. The SMD LED lamp beads composed of red, green and blue have good consistency and the viewing angle can reach more than 140°.
(4)One screen with multiple functions and flexible installation
It supports the installation of straight-face screens, curved screens, right-angle screens, and Rubik's Cube screens, with two installation methods: seat mount and ceiling mount, to meet the needs of different customers and different scenarios.
(5)Power current backup power supply, never black screen
Adjacent cabinets can supply power to each other, avoiding the black screen of the cabinet caused by power line failure, power aviation plug failure, power failure and other reasons.
(6)Drive scheme
It has the functions of blanking above and below the column, high refresh rate, improvement of darkening of the first row, low gray color cast, improvement of pitting and other functions.
(7)Bump protection corner
The protective corners can effectively protect the four corners of the cabinet, reducing the problems of bumping off the lamp and damage to the lamp beads and lampshade during transportation.
(8)Stable and reliable performance
Good heat dissipation, low temperature rise, support low-voltage switching, safe and reliable, and long service life.
(9)Efficient maintenance
Fully modular design (cabinets, modules, detachable power box), support front and rear maintenance, convenient and quick.
Parameters name | P1.95 | P2.604 | P2.97 | P3.91 | P4.81 |
Pixel structure(SMD) | 1415 | 1415 | 1415 | 1921 | 2525 |
Pixel pitch(mm) | 1.95mm | 2.604mm | 2.97mm | 3.91mm | 4.81mm |
Module resolution(W×H) | 128*128 | 96*96 | 84*84 | 64*64 | 52*52 |
Module size(mm) | 250*250*18 | 250*250*18 | 250*250*18 | 250*250*18 | 250*250*18 |
Module weight(Kg) | 0.7(Plastic module),1(Die-casting aluminum module) | ||||
Cabinet module composition | 2*4/2*3/2*2 | ||||
Cabinet size(mm) | 500*1000*83 / 500*750*83 / 500*500*83 | ||||
Cabinet resolution(W×H) | 256*512/256*384 /256*256 | 192*384/192*288 /192*192 | 168*336/168*252 /168*168 | 128*256/128*192 /128*128 | 104*208/104*156/104*104 |
Cabinet area(m²) | 0.5 / 0.375 / 0.25 | ||||
Cabinet weight(Kg) | 13.6/10.2/6.8 (Plastic module),16/12/8(Die-casting aluminum module) | ||||
Cabinet material | Plastic/die-casting aluminum (module), aluminum profile (casing) | ||||
Pixel density(pixels/m²) | 262144 | 147456 | 112896 | 65536 | 43264 |
IP rating | IP66 | ||||
Single-point chromaticity/brightnesscorrection | With | ||||
White balance brightness(cd/m²) | 4500 | ||||
Color temperature(K) | 6500-9000 | ||||
Viewing angle(horizontal/vertical) | 140°/120° | ||||
Contrast ratio | 5000:1 | ||||
Maximum power consumption(W/m²) | 700 | ||||
Average power consumption(W/m²) | 235 | ||||
Maintenance type | Front/back maintenance | ||||
Frame rate | 50&60Hz | ||||
Scanning number (constant current drive) | 1/32s | 1/24s | 1/21s | 1/10s | 1/10s |
gray scale | Arbitrary within 65536 levels of gray | ||||
Refresh frequency (Hz) | 3840 | ||||
Color Processing Bits | 16bit | ||||
Lifespan (h) | 50000 | ||||
Operating temperature/humidity range | -10ºC-50ºC/10%RH-98%RH(no condensation) | ||||
Storage temperature/humidity range | -20ºC-60ºC/10%RH-98%RH(no condensation) |
Q: Can I have a sample order for LED screen?
A: Yes, sample order is available for quality check and market test. Both for LED module and whole screen.
Q: How can I get the technical support?
A: We support remote video control at now.
Q: What is your MOQ for LED screen order?
A: Any quantity is acceptable for your order. And the price is negotiable for large quantity.
Q: How to proceed an order for LED display?
A: First, let us know your requirements or applications.
Then, we quote according to your requirements or applications.
Third, customer confirms the design document and places deposit for formal order.
Last, we arrange the products.