MXEL 8119-2 Explosion proof high bay light
LED Explosion Proof Lights have good explosion-proof function, suitable for IIA, IIB, IIC explosive gas environment and various inflammable and explosive places, mainly used in railway, electric power, metallurgy, petroleum, petrochemical, chemical, steel, aviation, ship and each efficient lighting in factories, stations, large facilities, venues and other places.
Explosion proof high bay pendant light provides about 130lm/w and are designed to meet globel explosion proof Standard.
Features
(1) Using imported LED light source, the average service life is up to 100,000 hours. The power supply adopts wide voltage processing, which can achieve constant current output. It has the function of short circuit and over voltage protection, and greatly prolongs the service life of the lamps.
(2) The design of the convection structure with independent upper and lower ventilation improves the heat dissipation performance and avoids the accumulation of dust in conventional LED radiators. The radiators are arranged in an internal and external circular array to improve the heat dissipation performance.
(3) Using high purity tempered glass, the transmittance is as high as 95%-98%. Light projection is uniform and soft, especially suitable for all kinds of low-roof, platform, high-roof, high-shed and other places as fixed lighting.
(4) The protection level of the lamp body is IP66, and the anti-corrosion level can reach WF2. The surface of the lamp body will never corrode and rust.
(5) Various installation modes such as suspended ceiling, bent bar, vertical bar, ceiling suction and U-shaped shock-proof bracket (adjustable angle) can be adopted as required.
LED Explosion Proof High Bay Lighting is ideal for industrial lighting in hazardous or extreme environments where flammable gases or vapors, flammable liquids, combustible dust, and/or ignitable fibers may exist. Explosion Proof High Bay LED Lights are also suitable for wet locations and marine environments with saltwater spray.
Model | MXEL 8119-2 |
Rated Voltage | AC220V |
Power | 180-280W |
Protection Level | IP66 |
Lighting Angle | 90° |
LED Qty | 208PCS |
Base Specifications | CREE3030 |
Anti-corrosion Grade | WF2 |
Explosion Proof Grade | ExdembIICT5Gb |
Light Efficiency | 120Lm/W |
Frequency | 50/60Hz |
Power Factor | >0.95PF |
Operating Temperature | -20~40ºC |
Storage Temperature | -20~40ºC |
Light Source | ledPCS |
Correlate Color Temperature | 3000-6500K |
Color Rendering Index | ≥70RA |
LED'S Operating Life | 100000hours |
Start-up Time | ≤0.2s |
Inlet thread | DN20,G3/4'' |
Cable length | ≥50cm |
Weight | 9.5KG |
Size | Φ415×215mm |
Suitable for IIA, IIB, IIC explosive gas environment and various flammable and explosive places. Mainly used in railway, electric power, metallurgy, petroleum, petrochemical, chemical, steel, aviation, ship, stations, large facilities, venues and other places.
Name | Description | Quantity | Name | Parameter |
Outer box | 37.3*37.3*25.3cm | 1 | N.W. | 7.8kg |
Paper tray | Set of compressive cardboard | 1 | G.W. | 8.7kg |
Cardboard | 7-layer corrugated paper | 1 | ||
Packaging method | 1 pack 1 With compression cardboard |
Schematic diagram
1.Before installation, it is necessary to check whether the actual operating conditions are in conformity with the parameters listed on the lamp nameplate.
2.Before installation, please test the lighting according to the parameters of the lamp nameplate to ensure that there is no quality problem before installation.
3.Before installation, it is necessary to determine the installation location and mode of the lamps according to the installation mode provided by the product, in combination with the on-site use environment and lighting requirements, so as to ensure that the installation is firm and reliable.
4.Connect the prepared cables with the input cables of lamps and lanterns according to the corresponding fire (brown), zero (blue) and ground (yellow-green) wires, so as to ensure that the connection is firm, and make good insulation and waterproof measures at the connection.
5.The input end of the cable can be connected to the power supply of the corresponding voltage to illuminate.
Using The Matters Needing Attention
1. This product is an explosion-proof product and can be used in explosion-proof places.
2. When transporting, the lamp should be installed in the carton equipped with foam shock absorption.
3. When using, the surface of the lamp has a certain temperature rise, which is a normal phenomenon.
4. The power supply voltage can work normally in the rated voltage. If the power supply voltage is too high, the lamp will be damaged; if the voltage is too low, the lamp will not start normally.
5. The luminaire must be reliably grounded
Quality Assurance
The company has passed ISO9001:2008 international quality system audit certification, this product strictly implements ISO9001 international quality management system standard production, to ensure that the product quality fully meets national standards and design requirements.
A:10pcs. Sample is avaiable.
A:Normally 5-10 working days. It depends on the qty.
A:Yes, we can customize the Voltage, Color temperature, etc.
A:Normally 3-5 years.
A:Yes, Please inform us formally before production and confirm the design firstly.
A:Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new orders for small quantities.
For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to the real situation.
A:The shipping cost depends on the way you choose to get the goods. Express is normally the quickest way. Seafreight is the best solution for big amounts.
A:A5:You can make the payment to our bank account, T/T or PayPal: 50% deposit in advance, 50% balance against the copy of B/L.