Product descriptionSpindle Force Dynamometer
Product Features: Hydraulic mechanical structure, high stability
Specifications Instructions:
1. Verify pull force gauge bolt specifications on with four claw specifications correspond.
2. Rally and the front spindle taper portion wipe clean, Rally to clamp.
3. In response to the specifications of each knife, pull range as follows:
Picture show1.Confirm whether the pull bolt specification on the dynamometer corresponds to the specification of the four claws.
2. After wiping the tension gauge and the taper of the front end of the spindle, hold the tension gauge.
3.In order to ensure the
correctness of the measured data, the tension meter must be used in the case of pre-tensioning.
The impact of abnormal pull value
1. If the pull value is too large:
It is easy to cause damage to the broach mechanism claw and the shank pull pin. 2.If the pull value is too small:
When the spindle broach is rotated, the inner claw cannot grasp the bolt due to insufficient pulling force. At this time, when the machining is easy, the spindle that is rotated by the shank is thrown out, which is likely to cause operator injury, and the accuracy of the spindle and the sheet metal of the machine bed are damaged.
2.Tool Holder Shanks: BT Tool Holders, DIN69871 SK Tool Holders, NT Tooling, CAT30 CAT40 CAT50 Tool Holders, HSK Tool Holders, DIN 69880 VDI Tool Holders, Morse Taper, Straight Shank Tool Holders, etc.
3.Tool Holders: Collet Chucks, Milling Chucks, Face Mill Holders, Weldon End Mill Holders, Morse Taper Adapters, Drill Chucks, Tapping Chucks, Shrink Chucks, Thread End Mill Tool Holders, Screw in Milling Cutter Holders, etc.
4.Collet: ER Collets, ERC Collets, ERG Collets,Milling Chuck set ,Straight Collets, OZ Collets, etc.
5.Accessories: Tool Holder Bushing, Nut and Spanner, Pull Stud, Tool Holder Locking Device, Machine Vise,Live Center etc.
WorkshopFAQQ. Are you factory or Trade Company?
A. We are Industry and trade integration.
Q. Could you supply samples?
A. Yes, we can supply.
Q. Where do you export?
A. The whole world.
Q. Could you produce non-standard products?
A. Yes, we can. Please supply samples or drawing.
Q. What's the accuracy of ER Collet?
A. We have three kinds. 0.005mm 0.01mm and 0.015mm.
Q. What are the shipping ways?
A. By international express, by air, by sea are all ok.
Q. Do you have minimum order quantity?
A. Conventional Products don't have. The minimum order quantity of non-standard products is 50pcs.
Q. What's your payment way?
A. T/T, Pay pal, Western Union and so on.
Q. What's your delivery time?
A. 5-20 days after order confirmed
Q. What's your package?
A. Neutron-packing with no brand, plastic box, carton and so on. If your quantity is good, we can package with your demand.
Complaint
