USB to Ttl Uart Serial 5V 3.3V Adapter Converter Cable 4 Pin 0.1 Inch Pitch

Min.Order: 10

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 1.98 ~ 6.99

Description

USB to TTL UART Serial 5V 3.3V Adapter Converter Cable 4 Pin 0.1 inch Pitch

FTDI USB to TTL UART 3.3V Logic Level Adapter Cable, USB to 6 Pin TX RX GND VCC(5V) CTS RTS FeMale Socket Header
Geniue FTDI PCB Serial Module Inside , Widely Used in USB 2.0 type A male terminal for wider c ompatibility and supports reliable data transfer rates
Length: 6 feet USB TTL Serial Cable ,provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND,CTS, RTS
Geniune FT232RL chipset Import from UK on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM
Co mpatible with Windows 10, 8, 8.1, 7 (32, 64-bit), Android, 2008/XP/Vista/CE; ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc.

Cable Type	USB
Color	3V3 Level
Co m patible Devices	Server
Connector Type	Usb

MOQ	500pcs
Lead time	4 week

1. Description caratar USB to TTL serial UART converter cable provides a fast, simple way to connect devices with a 3.3V TTL level serial interface to USB port. It integrates PROLIFIC PL2303TA USB to serial UART interface IC device. The PL2303TA chip used is housed within the USB A connector. The cable is terminated with a 4 pin 0.1 inch pitch header socket which provides access to the transmit (Tx), receive (Rx), VCC and GND connections. The USB serial converter cable required USB driver, available from prolific website which are used to make the PL2303TA on the PCB board appear as virtual CO M port (VCP driver). It allows users to co mmunicate with the USB interface via a standard PC serial emulation port.

2. Features USB 2.0 full speed, back co mpatible with USB1.1, USB1.0 PL2303TA chip on PCB board PCB board pinout (USB end): TXD, RXD, CTS, RTS, VCC, GND 4 pins wired (2.54mm header end): TXD, RXD, VCC, GND VCC supports 3.3V and 5V supply output UART interface supports 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity Serial data transfer rates up to 3M Internal EEPROM with users writable area Data signal levels: +3.3v or +5v optional Support VID, PID and other reprogrammed function USB bus powered, no extra power required Low PC USB bandwidth consumption Range -104ºF to +185ºFoperation temperature

Product name		USB TO TTL CABLE
Why choose us		15 years of strength in the field of home audio-visual accessories and cables, with perfect service and after-sales guarantee
Features		Serial co mmunication
package		PE Bag

4 6 8 Wire 3.5KV DB9 Male to Female M F Serial Optoelectronic RS232 to RS232 Optical Isolator Converter

Due to the photoelectric isolation technology, the electrical and ground loops of the RS-232 devices at both ends are completely isolated, thereby protecting the communication equipment from power ground loops and surge interference and damage, and significantly improving the reliability and reliability of the communication system. Stability. At the same time, due to the change of the original RS-232 interface single-ended transmission mode, the use of two-wire balanced transmission greatly increases the communication distance. In the field of asynchronous RS-232 point-to-point communication using dedicated own lines, this product can be used to meet the needs of interface protection or extended distance. The product has 4 wires, 6 wires, and 8 wires to choose from to connect to the power supply. The 4 wire products can transmit a pair of data signals, and the 6 wire and 8 wire products can also transmit one or two pairs of control signals. Small size, no special requirements for wires, no external power supply, and can be directly plugged into the RS-232 interface of the device, which is very convenient to use. The series of products have been widely used in point-to-point RS-232 communication, multi-user terminal and host connection, RS-232 remote control system, program-controlled exchange billing terminal, satellite receiver.

Feature

Balanced current transmission, strong anti-interference ability Adopt photoelectric isolation to prevent equipment damage from ground loop surge and surge Isolation voltage reaches 3500V Support RS-232 asynchronous communication standard Insert RS-232 interface directly, easy to use No need for external power supply Use dedicated communication lines, ordinary wires The transmission rate can reach 57.6kbps Full duplex or simplex mode, small size 2.0 Performance parameters: Interface: one end complies with EIA RS-232 and CCTTT V.24 Asynchronous protocol, the other end uses a dedicated 4-core copper wire Connector: RS-232 side uses DB9 hole connector Use a DB9 pin connector on the side of the line Transmission mode: asynchronous, full duplex or simplex Distance: 12KM using 24AGW wire@600BPS 1KM uses 24AGW [email protected] 100KM uses 24-AGW [email protected] Isolation voltage: 3500@1S or 7500V pulse Speed: the highest asynchronous 57.6KBPS Power supply: self-powered by serial port Volume: 6.8x3.4x1.6cm Weight: 40g Working environment: -20 to 65°C (0%to95%RH) 3.0 Application areas: Point-to-point RS-232 communication Multi-user system Remote terminal Multi-user terminal and host connection RS-232 remote control system Program-controlled exchange billing terminal Satellite receiver Remote calling system Connection between RS-232 devices that do not share the same ground

Product Function Description

RS-232C interface: DB9 pin connector (DTR and DCD short circuit, RTS and CTS short circuit) Long-distance transmission line interface: use DB9 pin connector terminal Type: RS-232C side (near end) is directly connected to DTE equipment. Transmission line: 4 copper wires are used for transmission. Wiring method: There are two DB9-pin connectors at the far end between 2 to 3, 3 to 2, 4 to 5, 5 connect to 4 remote DB9 definition: 3 is T-, 4 is T+, 2 is R-, 5 is R+, when two products are connected, it is symmetrical power supply: power is supplied by one of TXD, RTS, DTR, transmission signal: TXD And RXD bidirectional transmission

Introducing the USB to Ttl Uart Serial 5V 3.3V Adapter Converter Cable 4 Pin 0.1 Inch Pitch, the ultimate solution for seamless communication between your USB-enabled devices and TTL/UART serial interfaces. This high-quality converter cable is designed to provide reliable and efficient data transfer, making it an essential tool for professionals and enthusiasts alike.

With its USB to TTL converter functionality, this adapter cable allows you to connect your USB-equipped computer or laptop to devices that utilize TTL/UART serial interfaces. Whether you need to program microcontrollers, update firmware, or establish a serial connection with various electronic components, this converter cable ensures a smooth and hassle-free experience.

Equipped with both 5V and 3.3V converter capabilities, this adapter cable offers versatility and compatibility with a wide range of devices. The 5V converter allows you to interface with devices that require a 5V power supply, while the 3.3V converter ensures seamless communication with devices that operate at a lower voltage. This flexibility makes it an ideal choice for professionals working with different types of electronic equipment.

Crafted with precision and durability in mind, this converter cable features a 4-pin 0.1 inch pitch design, ensuring a secure and reliable connection. The pins are thoughtfully arranged to facilitate easy and error-free installation, minimizing the risk of accidental disconnections or data loss. Additionally, the cable is constructed with high-quality materials to guarantee long-lasting performance, even in demanding environments.

When it comes to compatibility, this converter cable is designed to work seamlessly with a wide range of operating systems, including Windows, Mac, and Linux. This ensures that you can effortlessly integrate it into your existing setup, regardless of the platform you are using.

In conclusion, the USB to Ttl Uart Serial 5V 3.3V Adapter Converter Cable 4 Pin 0.1 Inch Pitch is a reliable and versatile tool that simplifies the process of connecting USB-enabled devices to TTL/UART serial interfaces. With its high-quality construction, compatibility with various operating systems, and flexible voltage conversion capabilities, this converter cable is a must-have for professionals and enthusiasts seeking efficient and seamless data transfer.

Forward

Related products