Categories

PS Test Tubes Lab Supplies Round Bottom
PS Test Tubes Lab Supplies Round Bottom
PS Test Tubes Lab Supplies Round Bottom
PS Test Tubes Lab Supplies Round Bottom
PS Test Tubes Lab Supplies Round Bottom

PS Test Tubes Lab Supplies Round Bottom

Min.Order: 2,000
Product origin: Jinan, Shandong, China
Infringement complaint: complaintComplaint
US$ 0.01 ~ 0.06

Description
PP PS Disposable laboratory Clear Plastic Conical Bottom Cylindrical Test Tubes Non-sterile  5ml and 8ml
 
 

Characteristic
 

1.Tubes: made of medical grade polystyrene or polypropylene

2.Caps: made of medical grade polyethylene

3.Tubes are available in two sizes: 12 × 75mm and 13 × 100mm

4.Caps are available in two colors: red or blue

    Ordering Information
     
    Cat #DescriptionSize(mm)MaterialColorVolumeSterileUnit
    12-1275Tube12x75PSClear5mlNO500 Sets/Pack, 4 Packs/Case
    12-2275Tube12x75PPClear5mlNO500 Sets/Pack, 4 Packs/Case
    12-1300Tube13x100PSClear8mlNO250 Sets/Pack, 8 Packs/Case
    12-1299Cap12x13.5PEBlue-NO1,000 Sets/Pack, 2 Packs/Case
    12-1399Cap13x17.5PERed-NO1,000 Sets/Pack, 2 Packs/Case

    1.What are the main factors that influence the maximum centrifugal acceleration force?
    Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
    The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
    Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

    2.What are autoclaving guidelines of plastics?
    To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

    3.What are Biologix's Commitments to Quality?
    We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc. 

    Related products
    PS Test Tubes Lab Supplies Round Bottom
    PS Test Tubes Lab Supplies Round Bottom
    US$ 0.01 ~ 0.06
    Lab Supplies Glassware Borosilicate Glass Test Tube Round Bottom Flat Bottom Test Tube with Screw Cap
    Lab Supplies Glassware Borosilicate Glass Test Tube Round Bottom Flat Bottom Test Tube with Screw Cap
    US$ 0.051 ~ 0.064
    10ml 25ml 50ml 100ml Flat or Round Bottom Clear Glass Test Tube Chemistry Lab Pyrex Test Tubes
    10ml 25ml 50ml 100ml Flat or Round Bottom Clear Glass Test Tube Chemistry Lab Pyrex Test Tubes
    US$ 0.1
    Lab Clear Plastic Test Tube Round Bottom Tube Vial with Cap Office Lab Experiment Supplies
    Lab Clear Plastic Test Tube Round Bottom Tube Vial with Cap Office Lab Experiment Supplies
    US$ 0.039 ~ 0.045
    Lab Glassware Customized Capacity Clear 24/40 Round Bottom Silica Quartz Test Tubes with Lid
    Lab Glassware Customized Capacity Clear 24/40 Round Bottom Silica Quartz Test Tubes with Lid
    US$ -1
    Lab and Medical Flat Bottom or Round Bottom Glass Test Tube with Cork
    Lab and Medical Flat Bottom or Round Bottom Glass Test Tube with Cork
    US$ 0.06 ~ 0.09
    Lab Conical Bottom 1.5ml 0.5ml Microcentrifuge Laboratory Test Tubes
    Lab Conical Bottom 1.5ml 0.5ml Microcentrifuge Laboratory Test Tubes
    US$ 0.002 ~ 0.08
    Small Round Bottom Laboratory Disposable Plastic/Glass Test Tubes
    Small Round Bottom Laboratory Disposable Plastic/Glass Test Tubes
    US$ 0.05 ~ 0.1
    Customers Also viewed
    Lab Supplies Round Bottom Glass Chemical Reagent Bottle
    Lab Supplies Round Bottom Glass Chemical Reagent Bottle
    US$ 0.26 ~ 0.43
    Chemistry Plastic Test Tubes Vials Seal Caps Pack Container Office School Chemistry Supplies Lab Supplies
    Chemistry Plastic Test Tubes Vials Seal Caps Pack Container Office School Chemistry Supplies Lab Supplies
    US$ 0.039 ~ 0.045
    Lab and Medical Flat Bottom Glass Test Tube with Cork Round Bottom Glass Tube for Preroll Packaging
    Lab and Medical Flat Bottom Glass Test Tube with Cork Round Bottom Glass Tube for Preroll Packaging
    US$ 0.1 ~ 0.21
    Silk Screen Lab Glass Tube and Medical Usage Tube with Flat Bottom Round Bottom Glass Test Tube
    Silk Screen Lab Glass Tube and Medical Usage Tube with Flat Bottom Round Bottom Glass Test Tube
    US$ 0.09 ~ 0.15
    Lab and Medical Flat Bottom or Round Bottom Glass Test Tube with Cork for Preroll Packaging
    Lab and Medical Flat Bottom or Round Bottom Glass Test Tube with Cork for Preroll Packaging
    US$ 0.2 ~ 0.3
    Product Tag:
    Related categories:
    Scroll to Top