Categories

Easy Connect PP Saddle Clamp Irrigation Pipe Fitting
Easy Connect PP Saddle Clamp Irrigation Pipe Fitting
Easy Connect PP Saddle Clamp Irrigation Pipe Fitting
Easy Connect PP Saddle Clamp Irrigation Pipe Fitting
Easy Connect PP Saddle Clamp Irrigation Pipe Fitting
Easy Connect PP Saddle Clamp Irrigation Pipe Fitting

Easy Connect PP Saddle Clamp Irrigation Pipe Fitting

Min.Order: 200
Product origin: Ningbo, Zhejiang, China
Infringement complaint: complaintComplaint
US$ -1

Description
HDPE clamp Saddle, clamp saddle hdpe, hdpe pipe saddle clamp, saddle clamp hdpe, saddle clamp for hdpe pipe, hdpe pipe clamp fittings, HDPE Saddle, hdpe pipe saddle, PP saddle

A HDPE clamp saddle fitting is used for joining an outlet into an existing pipeline. The fittings "tap into" the pipe, without requiring a cut and join in the main pipe.
 
HDPE pipe saddle clamp, mainly used for water pipes, come in two parts, with four bolts joining them around the pipeline (same diameter with two bolts). The HDPE clamp saddle fittings are the ultimate solution for connection of HDPE main pipelines to branch pipelines for cold water. Made from high quality PP-B or (or PVC) material, come with an EPDM rubber seal, the HDPE pipe clamp saddle fittings have a durable and leak free join, and they are resistant to etching by numerous chemical substances, and to UV rays, and are suitable for outdoor use.
 
SUNPLAST HDPE clamp saddle fittings are available to join onto 25mm to 315mm pipelines, with pressures up to 16 bars, the branch outlets come from 1/2" to 6" BSP female thread, and provided with 2, 4 or 6 bolts according to the diameters and metal reinforcing ring on the threaded branches.
 
HDPE pipe clamp saddle fittings are regularly assembled with PP compression male thread fittings, like PP compression male thread adaptor/elbow/tee, or HDPE Ferrule Tee..etc.
 
 
SUNPLAST HDPE compression fittings / PP compression fittings are manufactured in compliance with the requirements of standards EN 712/713/715/911; ISO 3501/3503/3458/3459.The fittings can be installed on HDPE pipes which are in compliance with standards ISO 11922; DIN 8072/8074; UNE 53131. The threaded versions are manufactured in compliance with standard ISO 7; DIN 2999.
 
More brief details as below:
ProductHDPE clamp Saddle, clamp saddle hdpe, hdpe pipe saddle clamp, saddle clamp hdpe, saddle clamp for hdpe pipe, hdpe pipe clamp fittings, HDPE Saddle, hdpe pipe saddle, PP saddle
Specification  25*1/2" to 315*6"
Pressure ratings PN16 or PN10
Material Saddle body in PP black co-polymer, nuts and bolts in zinc galvanized steel, o-ring gasket in NBR, reinforcing ring in galvanized steel or S/S
ColorBlack
Manufacturing StandardDimensions and characteristics:  ISO 3501/3503/3458/3459.
To be installed on HDPE pipes: ISO 11922; DIN 8072/8074;      
Threads (BSP): ISO 7; DIN 2999.
Samples available Yes, samples are available, but charged.
Packing method Cartons
MOQ Negotiable
Customized Logo available
(OEM Service)		For small quantity of order, customer logo can be marked on the fittings by laser marking or sticker.
For big quantity of order, customer logo can be embossed on the fittings.
Production lead time 
About 10 days for a 20ft container, 20 days for a 40ft container
Warranty time 1 years for normal use 
Payment term T/T, L/C, DP, Western Union, or negotiable 
FOB loading port Ningbo/Shanghai China 
Place of origin Ningbo, China 
 
 
Product Specifications  
HDPE clamp saddle fittings can be manufactured sizing from 25*1/2" to 315*6":

 
Size
(mm)		BoltsSize
(mm)		Bolts
25*1/2"2125*1-1/2"4
25*3/4"2125*2"4
32*1/2"2125*3"4
32*3/4"2125*2-1/2"4
32*1"2125*3"4
40*1/2"2125*4"4
40*3/4"2160*1/2"4
40*1"2160*3/4"4
50*1/2"2160*1"4
50*3/4"2160*1-1/4"4
50*1"2160*1-1/2"4
50*1-1/4"4160*2"4
50*1-1/2"4160*3"4
63*1/2"4160*2-1/2"4
63*3/4"4160*3"4
63*1"4160*4"4
63*1-1/4"4180*1/2"6
63*1-1/2"4180*3/4"6
63*2"4180*1"6
75*1/2"4180*1-1/2"6
75*3/4"4180*2"6
75*1"4180*3"6
75*1-1/4"4200*3/4"6
75*1-1/2"4200*1"6
75*2"4200*1-1/4"6
90*1/2"4200*2"6
90*3/4"4200*2-1/2"6
90*1"4200*3"6
90*1-1/4"4200*4"6
90*1-1/2"4225*1"6
90*2"4225*1-1/4"6
90*2-1/2"4225*1-1/2"6
110*1/2"4225*2"6
110*3/4"4225*2-1/2"6
110*1"4225*3"6
110*1-1/4"4250*2"6
110*1-1/2"4250*3"6
110*2"4250*4"6
110*2-1/2"4315*2"6
110*3"4315*3"6
125*3/4"4315*4"6
125*1"4315*6"6
125*1-1/4"4  
 

Benefits Of HDPE Clamp Saddle
HDPE clamp saddle fittings have become the most common fittings that are used for cold water plumbing & irrigation, because they can provide outstanding physical and performance benefits:
 
* Fast assemble & disassemble, Simple installation:No welding, No special tools required, easily assembling & disassembling, those makes HDPE clamp saddle more & more popularly used, especially for irrigation systems.
* lower installation costs & labor costs: HDPE clamp saddle is a fittings use a mechanical connection method, fast to install & less install workers will be required.
* Perfect watertight: The unique design & NBR "O" rings ensure Poly clamp saddle fittings a perfect watertight for long time use.
 
 
FAQS
 

* What is HDPE Clamp Saddle?
A: Our PP clamp saddles are used to create quick single branch outlets with a nominal pressure of 16 bars; they are available from diameter 25 to 315mm with various female threaded outlets (from ½" to 6″).
Our HDPE clamp saddles are equipped with a NBR 70sh flat gasket that maximizes the diameter for a better containment of the pipe drilling area and have a flat extension to ensure sealing even under undesired overpressure. They also have the patented anti-rotation system: the innovative spiked insert keeps the clamp saddle blocked over time, preventing it from rotating and sliding, suitable for PE80 pipes & PE100 pipes.
 
* what is the installation procedure of PP clamp saddle?
A: HDPE clamp saddle are very easy to install, which involves the following steps:
• Define the position of the branch and clean the external surface of the pipe.
• Put the O-ring in the relevant seat and position the upper part of the saddle on the pipe.
• Couple the bottom part of the saddle with the upper one. Insert the bolts from the bottom, screw the nuts and tighten the bolts diagonally opposite each other.
• Drill a hole in the pipe taking care not to damage the reverse of the pipe or the gasket.
 
* Can SUNPLAST HDPE clamp saddle exposed under sunshine?
A: Yes, all HDPE pipe clamp saddle fittings are UV-resistant, and can be used outdoor.
 
* HDPE electrofusion saddle & HDPE clamp saddle fittings, which one is better?
A: It is hard to say. HDPE clamp saddle fittings are easy installation, no welding, no special tools, it is specially useful in installations that may require occasional disassembly or partial removal for maintenance etc
 
HDPE electrofusion saddle needs welding machine to finish a electrofusion welding, it will be a bit complex in installation and higher installation costs, but the joints are much robuster.

 
 
Why Choose Us?
 Rich experience on manufacturing HDPE fittings over 20 years, we are an expert in this industry.
 Full product range available, you will always find the right solution here.
 Strong after-sale term supports to provide professional guide for installation.
 By using top quality raw material, with long warranty time on quality.
 Short lead time to satisfy your urgent need request.
 Quick reply for your inquiries within 12 hours.
 OEM service available to support a good sale in customers' market.

 
Contact Us
If you have any requirements on PP compression fittings, or any question on our fittings, please contact us freely. SUNPLAST has well trained staff who are available to address your needs and provide technical support to all sectors when needed.


Related products
Easy Connect PP Saddle Clamp Irrigation Pipe Fitting
Easy Connect PP Saddle Clamp Irrigation Pipe Fitting
US$ -1
PP Moulds Clamp Saddle Fitting for Pipe
PP Moulds Clamp Saddle Fitting for Pipe
US$ 0.36 ~ 1.52
Ifan Factory Supply PP Compression Fitting HDPE Saddle Clamp for Irrigation
Ifan Factory Supply PP Compression Fitting HDPE Saddle Clamp for Irrigation
US$ 0.34 ~ 0.38
Easy Connect PP Compression Fittings Ball Valve Irrigation Pipe Fittings
Easy Connect PP Compression Fittings Ball Valve Irrigation Pipe Fittings
US$ 0.5 ~ 2
Pn16 Coupling PP Clamp Saddle HDPE Pipe Fitting Ball Valves PP Compression Fittings
Pn16 Coupling PP Clamp Saddle HDPE Pipe Fitting Ball Valves PP Compression Fittings
US$ 0.2
Pn16 Female Elbow PP Clamp Saddle HDPE Pipe Fitting Ball Valves PP Compression Fittings
Pn16 Female Elbow PP Clamp Saddle HDPE Pipe Fitting Ball Valves PP Compression Fittings
US$ -1
Pn10 2 Inch PP Clamp Saddle HDPE Pipe Fitting PP Compression Fittings
Pn10 2 Inch PP Clamp Saddle HDPE Pipe Fitting PP Compression Fittings
US$ 0.27 ~ 0.28
Ifan Irrigation PP Compression Fittings Quick Connect 20-110mm HDPE Pipe Fitting
Ifan Irrigation PP Compression Fittings Quick Connect 20-110mm HDPE Pipe Fitting
US$ 0.0875 ~ 0.1895
Customers Also viewed
PP Irrigation Water Fitting 3/8 Connect Pipe Fittings 1/2 HDPE 1/2" Connector Irrigation Quick Compact Valve
PP Irrigation Water Fitting 3/8 Connect Pipe Fittings 1/2 HDPE 1/2" Connector Irrigation Quick Compact Valve
US$ 0.6 ~ 1.3
Quick Connect Fitting PP Directly Inserted Into The Pipe
Quick Connect Fitting PP Directly Inserted Into The Pipe
US$ 0.4 ~ 0.9
China OEM Plastic PVC Drain Quick Pipe Fitting Saddle Clamp
China OEM Plastic PVC Drain Quick Pipe Fitting Saddle Clamp
US$ 0.2 ~ 80
Water Gas Supply HDPE Water Pipe Coupling Elbow Tee Valve End Cap Clamp Saddle HDPE Fitting with Butt Fusion Welding and Electrofusion for Drainage Irrigation
Water Gas Supply HDPE Water Pipe Coupling Elbow Tee Valve End Cap Clamp Saddle HDPE Fitting with Butt Fusion Welding and Electrofusion for Drainage Irrigation
US$ 0.5 ~ 10.5
Piping Systems PP Compression/Irrigation Pipe Fitting
Piping Systems PP Compression/Irrigation Pipe Fitting
US$ 0.982 ~ 4.268
Product Tag:
Related categories:
Scroll to Top