Complaint
Parameters and Configurations | ||||
Span length | 8m, 9.6m, 10.8m, 12m, 16m | Adjusted to your request | ||
Bay width | 4m, 5m, 8m, 10m | Adjusted to your request | ||
Gutter height | From 3.0m to 8.0m | Adjusted to your request | ||
Steel structure | Hot-dip galvanized steel frame, no welding joint structure. | |||
Cover material | Film with UV and anti-drip layer, PC sheet, 5mm reinforced glass. | |||
Shading system | External and internal shading system to block the sunshine | |||
Cooling system | Cooling pad and exhaust fans | |||
Heating system | Gas/Coal/Oil fired boiler with blowers | |||
Other system | Ventilation system, thermal insulation system, seedbed system, irrigation system, lighting system, IOT system etc. | |||
Advantages | |
1 | Main part from design, produce, assembly, all done in our workshop |
2 | No welding joint structure with high corrosion and rust resistance |
3 | All connectors on greenhouse produced by us and all bolts are hot-dip galvanized |
4. | Main structure with 15 years quality assurance and spare parts available all time |
Item | Raw material | Dimension (mm) | ||
Main columns | Double side hot-dip galvanized steel tubes | 50*100, 60*80, 100*100 etc, adjusted on the climate condition | ||
Anti-wind columns | Double side hot-dip galvanized steel tubes | 30*50, 50*50, 50*100 etc, adjusted on the wind speed | ||
Gutter | Hot-dip galvanized steel, stainless steel, aluminum alloy available | Thickness 2.0 most common, adjusted and customized | ||
Truss | Steel tube and angle steel, welded and then galvanized | Length from 8000 to 12000, adjusted and customized | ||
Other | Designed and customized for different project, listed in the quotation sheet for you. | |||
Agricultural With Hydroponic Growing System1.Provide more moisture and nutrition for vegetables and fruits 2.Cleaner, more tidy 3.Easy to clean | |
Air coolers1. Strong plastic frame with nylon blade, aluminum alloy rack. 2. Copper coil motor, low noise pump. 3. Cooling pad inside with long service life. Three wind direction outlet available. | Exhaust fans1. Stainless steel blade, diameter 1000mm and 1250mm. 2. Hot-dip galvanized steel and aluminized zinc frames 3. Both domestic and other brands motor available | Cooling pads1. Thickness 10mm and 15mm for tropical area 2. Hot-dip galvanized and aluminum alloy frame available 3. Height adjusted, length not over 60m each set. |
Hot water boiler1. Coal/Gas/Oil fired boiler or mixed fuel boiler available 2. Designed and produced by FUMA, with patent right. 3. High efficiency over 80% and low fuel cost. 4. Easy to install and guide on maintenance available 5. Our own brand, designed and produced by us. | Hot air blower1. Designed and produced by FUMA, high efficiency. 2. Compact structure, small space needed, easy to install 3. Thicker hot-dip galvanized steel frame, long service life 4. Aluminum alloy shell motor, high heat dissipation 5. Our own brand, designed and produced by us. |
| Roof ventilation system include gear motor, rack and pinion device and aluminum alloy frames, most common for glass and PC sheet greenhouse. With anti-insect net to protect. | Side and roof ventilation system include coil motor, roll bar and vertical climb bar, windows with anti-insect net to prevent insect invading. |
Qingzhou XinHe Greenhouse Horticulture Co., LTD is a professional company which sets greenhouse and supporting facility design, manufacture and research&development in one. The major products include flower market greenhouses, planting greenhouses, aquaculture greenhouses, livestock breeding greenhouses, ecological restaurant greenhouses, glasshouses, spherical greenhouses, sunlight-plate greenhouses, photovoltaic solar energy greenhouses,film greenhouses and corresponding accessories.
We have WorkshopStronger factory customization ability. | Professional Service TeamComplete installation drawing, manual and video |
1. Less than 2000 square meters, 7 days.
