Complaint
HIGH DENSITY POLYETHYLENE (HDPE) is commonly known as low pressure POLYETHYLENE. Compared with LDPE and LLDPE, it has higher temperature resistance, oil resistance, steam permeability resistance and environmental stress cracking resistance. In addition, it has good electrical insulation, impact resistance and cold resistance, which is mainly used in blow molding and injection molding fields.
1.Fiber ( Carpet, Textils, Upholstery, etc.)
| No. | Grade | Type | MFR ( g/10min ) | Tensile Strength MPa | Elongation At Break (%) | Environmental stress-cracking |
| 1 | 5000S | Extrusion | 0.9 | 23 | 800 | |
| 2 | 5200B | Blow Molding | 0.35 | 23 | 800 | 25 |
| 3 | 2200J | Injection Molding | 5.5 | 23 | 180 | |
| 4 | 3000J/JE | Injection Molding | 2.3 | 26 | 400 | |
| 5 | 6100M | Extrusion | 0.13 | 18 | ||
| 6 | 1500J | Injection Molding | 20 | 28 | 40 | |
| 7 | 6600B | Blow Molding | 0.35 | 23 | 500 | 100 |
| 8 | 6360M | Extrusion | 0.22 | 24 | 600 | 1000 |
| 9 | 6380M | Extrusion | 0.1 | 22 | 600 | 1500 |
| 10 | 7000F | Extrusion | 0.042 | 24 | 450 | 300 |
| 11 | 2100J | Extrusion | 6.5 | 20 | ||
| 12 | 1600J | Extrusion | 18 | 25 | 40 | |
| 13 | 7600M | Extrusion | 0.04 | 22 | 600 | 10000 |
| 14 | 7800M | Extrusion | 0.04 | 26 | 600 | 500 |
| 15 | 5300B | Blow Molding | 0.4 | 23.5 | 480 | 600 |
| 16 | 2300XM | Extrusion | 5.5 | 22 | 400 | 400 |
| 17 | 8200B | Blow Molding | 0.03 | 25 | 500 | 600 |
| 18 | 8300B | Blow Molding | 0.021 | 24 | 500 | 550 |
| 19 | 7300M | Extrusion | 0.07 | 22 | 500 | 500 |
