Fe/Zinc/Lead/Pb Adhesive 60g Balance Weight for Car & Truck

Min.Order: 1
Product origin: Cangzhou, Hebei, China
Infringement complaint: complaintComplaint
US$ 1250 ~ 1380

Description

Specifications

Steel Adhesive Wheel Weights 

Steel, Lead-Free to comply with European Standard
 

Zn Plated, Nonpoisonous Coating (After that Polymer Coated if Ordered)

Salt-Spray Tested to Resist Corrosion for more than 48 Hours.

Weights are pre-cut and pre-taped. No cutting, no pre-contouring, and no waste.

Used in balancing all types of alloy wheels. Suitable for cars, trucks, van, motorcycles.
 

Specification
Type
balance weight
Size
5g+10g 60g
Car Make
Car
Place of Origin
China
Type
Manual
Product Name
balance weight
MOQ
5 boxes
Thickness
0.5mm
Warranty
1 Year
Quality
100% Inspection
Test Equipment
CMM
Color
Red blue
1. Pre-treat the rim
Apply a suitable cleaning agent on the area where weight is to be applied. Wipe the area clean and dry.
Please note: be sure to test the cleaning agent on a small area to ensure it will not damage the wheel's finish.
2. Select adhesive weight size
Adjust the adhesive weight to the rim radius. The radius of the weight body must run at least parallel to the rim
radius. It is even better if the radius of the weight is smaller than the rim radius. Cut the correct amount of
adhesive weight needed.
3. Apply the weight
Remove the tape backing and press the center of the weight exactly at the imbalance point.
Please note: Do not touch the tape surface after peeling off the tape backing.
4. Secure the weight
Once the center of the weight is located at the imbalance point, press down the weight to the rim from the
middle towards the outer edges. Firm hand pressure should be enough to secure the weight.









 
Scroll to Top