Mortar, Concrete, Brick /Road/Marble Masonrysurface Building Material Waterproofing Agent with 52% Potassium Methyl Siliconate

Min.Order: 50
Product origin: Hangzhou, Zhejiang, China
Infringement complaint: complaintComplaint
US$ 1 ~ 10

Description
Silway715  water repellent is a water-dilutable solution of potassium methyl siliconate.

Product Description

Potassium Trimethylsilanolate is a basic water solution mainly composed of potassium and methyl silica gel, which can react with CO2 or other acid compounds in the air to form the active substance polymethylsilicic acid to produce waterproof property. Water repellent for minerals.

The product should be diluted with water when used., can produce surface waterproof and reduce moisture absorption. It is permeable, absorbable and able to maintain the natural appearance of the substrate. Can react with CO2 or other acidic compounds in the air, on the surface of substrate to form a layer of insoluble mesh breathable waterproof membrane, has excellent waterproof effect and anti-seepage, moisture, rust resistance, anti-aging, anti-pollution, avoid water suction base, thus reducing the freezing and thawing and weathering cause peeling off, increasing basal life. This is the product of simple construction, low cost, the effect lasting, scrub resistance, high and low temperature resistance (-50 ~ 150 ºC)

 
Product name Potassium methylsilanetriolate   Potassium methyl-silicate    Trimethylsilanol potassium salt    Potassium Trimethylsilanolate
AppearanceColorless Transparent
Solid Content (90 min at 150 ºC, %)52
Active Content, %30
Solventwater
Specific Gravity (25/25 ºC)1.25-1.4
Applicationbricks, sandstone, limestone, and ceramics,water glass additives and so on 
AdvantageLow VOC 
Water-based system, environmentally friendly
Greatly improve the service life of the substrate
Excellent waterproof performance and good weather resistance
 

Typical applications

 

Usage

1. Clean the surface of the substrate before use, and remove the water, dirt and other attachments of the substrate to be treated. If there are cracks, fill it with putty or cement slurry.


2. Slightly moisten the surface of the substrate for absorption before construction.

3. Dilute to 3% or lower when used. If more than 3% concentration is needed, it must be verified experimentally. High concentration will lead to white residue on the waterproof surface.

4. The construction can be carried out by soaking, spraying or painting with dishcloth, sponge, brush, roller and sealing spray gun. It can also be used in concrete.

5. After painting, the treated surface shall be naturally dried, and the surface shall be painted twice before drying. If use in stone material, ceramic tile surface protection is dealt with, after construction did not watch dry before wipe with soft cloth redundant liquid, do not touch water to conserve at least 24h.

 

Attention

1. Before use, a small sample concentration test should be conducted to determine whether the concentration is suitable for your specific use.


2. This product is highly corrosive, and it is strictly prohibited to contact with the skin directly. If it is accidentally touched, please wash it with water immediately. If contact with eyes, immediately wash with water for 15 minutes and seek medical advice. This product can also damage or kill plants, contaminate or corrode glass, plastic, aluminum and most metals. Special care should be taken when spraying. When used for home storage, avoid contact with children. But this product brush coating dry after alkaline disappeared, harmless to human body.

3. The preparation of waterproof agent is too high or used too much. After drying, a small amount of white precipitate will be formed on the coating surface.

4. In winter, if the temperature is too low, the product will freeze the crystal structure. When heated to room temperature, the solution will be transparent.

5. It is recommended to wear protective gloves and face glasses during construction, and avoid inhaling the fog generated by the product during outdoor construction. When spraying or fogging in the closed environment, partial exhaust is recommended.

Hot-sale Products

 

 

 

FAQ

Q1: Are you a manufacturer? 

A:We are manufacturer. You are welcome to visit our factory.

Q2: How to contact with us? 
A:Click the "Contact Now" And then send us message the product you are interested in, you will  get prompt reply.

Q3:Which kind of payment terms do you accept? 
A:Support client with different payment term,such as T/T,L/C,Paypal and so on .

Q4:Can you give me a discount ? 
A:Sure,It depends on your qty.

Q5:How can i get a sample? 
A:You can get free samples for some products,you only need to pay the shipping cost or arrange a courier to us and take the samples.

Q6: How to confirm the Product Quality before placing orders? 
A:We will send you specifications/TDS/COA/MSDS of the products,or you can require some samples for trial/test before you place order.

Q7:What is the biggest advantage of the company?
A:In order to be your long business partner ,we promise the best Quality, Reasonable price and Qty you need..At the same time ,satisfactory after-sales service.
Product Tag:
Related categories:
Scroll to Top