Complaint
The TS922 and TS922A devices are rail-to-rail dual BiCMOS operational amplifiers optimized and fully specified for 3 V and 5 V
operation. These devices have high output currents which allow low-load impedances to be driven.Very low noise, low distortion, low offset, and a high output current capability make these devices an excellent choice for high quality, low voltage, or battery operated audio systems.The devices are stable for capacitive loads up to 500 pF.
1.Pin diagram:
2.Absolute Maximum Ratings:
1. All voltage values, except differential voltage are with respect to network ground terminal.
2. The differential voltage is the non-inverting input terminal with respect to the inverting input terminal. If Vid > ±1 V, the maximum input current must not exceed ±1 mA. In this case (Vid > ±1 V), an input series resistor must be added to limit the input current.
3. Do not exceed 14 V.
4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short- circuits on all amplifiers. These values are typical.
5. Human body model: 100 pF discharged through a 1.5 kΩ
resistor between two pins of the device, done for all couples of pin combinations with other pins floating.
6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of pin combinations with other pins floating.
7. Charged device model: all pins and plus package are charged together to the specified voltage and then discharged directly to ground.
8. There is no short-circuit protection inside the device: short-circuits from the output to VCC can cause excessive heating. The maximum output current is approximately 80 mA, independent of the magnitude of VCC. Destructive dissipation can result from simultaneous short-circuits on all amplifiers.
3.Electrical characteristics:
Electrical characteristics measured at VCC = +3 V, VCC- = 0 V, Vicm = VCC/2,Tamb = 25 °C, and RL connected to VCC/2 (unless otherwise specified)
• Rail-to-rail input and output
• Low noise: 9 nV/√Hz
• Low distortion
• High output current: 80 mA
(able to drive 32 Ω loads)
• High-speed: 4 MHz, 1 V/μs
• Operating from 2.7 to 12 V
• Low input offset voltage: 900 μV max.
(TS922A)
• ESD internal protection: 2 kV
• Latch-up immunity
• Headphone and servo amplifiers
• Sound cards, multimedia systems
• Line drivers, actuator drivers
• Mobile phones and portable equipment
• Instrumentation with low noise as key factor
• Piezoelectric speaker drivers
why choose us :
advantage:
1.Produce Range
Yangjiang RUIXIAO Enterprise Co,.Ltd,major in the electronic component , who have wide range of products,
such as IC,resistor , capacitor , mosfet , diodes, module , LED, relay, lcd. pcb board . and so. the brand involves:SHARP, POWER, , NS, ON, ST , IR, VISHAY , TOSHIBA, FAIRCHILD,MICROCHIP, ATMEL,EVERYLIGHT all the kinds of electronic component you need will be find in here.
2.Production workshop
3.Scope of application
the product is widely used in Automotive industry control,new energy industry,Audio,Home appliances equipment,Communication industry.it can meet the diverse needs of customers
4.service:
with the "User first, customer first" Company motto, quality assurance , economic price , fast Delivery time is our only faith. we will try our best to make every customer to enjoy the the most flexible,efficient services.We sincere hope that we can seek the common development and cooperation with the customer together to achieve a win-win situation.
5.Logistics:
we can send the goods to the customer's country directly by the international logistics. no matter send by air or by sea.
we will try our best to let the customer to get the parcel more convenient .
(noted:Not bear any fee and tax of the transportation cost.)
