100 Gallon Industrial Chemical Stainless Steel Mixing Tank with Agitator

The mixing tank is an upper open structure, which has the functions of heating, automatic temperature control, heat preservation, and stirring; it has the advantages of fast heat transfer, adaptable to large temperature differences, and convenient cleaning. Widely used in food, pharmaceutical, daily chemical, beverage, oil, chemical, pigment and other industries for heating, mixing and sterilizing. It is especially suitable for small and pilot tests in units without steam heat sources and scientific research institutions. And according to the needs of the process, a fully enclosed structure can be adopted.

Main technical and structural properties:
1. Volume: 50L, 100L, 200L, 300L, 500L, 600L, 1000L~5000L.
2. Heating method: the electric heating rod is inserted into the jacket, and the heating is uniform without cold zone. Heat conduction oil or water is injected into the jacket as the heating medium to generate heat energy to heat the materials in the tank.
3. Material heating temperature: ≤100°C; material heating time: 30min-90min (depending on process requirements).
4. Temperature control: The thermocouple is used to measure the temperature and connected to the temperature controller to measure and control the temperature, and the temperature of the material can be adjusted.
5. Tank body: the inner surface is mirror polished, and the roughness Ra≤0.4μm.
6. Upper cover: It is two openable movable covers, which are easy to clean, and the inner and outer surfaces are mirror-polished (roughness Ra≤0.4μm).
7. Inner tank bottom structure: It is processed into an R angle by spinning, and there is no dead angle after welding and polishing with the inner tank body, and there is no retention of clean materials.
8. Jacket form: full jacket, used to add heat transfer oil or water to achieve the best heating and cooling during work.
9. Insulation material: It is filled with pearl wool, rock wool or polyurethane foaming to maintain the temperature difference with the outside world and achieve the effect of heat insulation.
10. Surface treatment of the outer shell: mirror polishing or 2B primary color matt or 2B frosted surface matt treatment.
11. Stirring device: Stirring in the center of the top, the output shaft of the reducer and the shaft of the stirring paddle are connected by a looper, which is convenient for disassembly and cleaning.
12. Stirring speed: 15~120r/min (constant speed); paddle type: frame type, anchor type, paddle type, turbine type, etc. (according to process requirements).
13. Leg form: round tube type or hanging lug type.
14. Equipment configuration: electrical control box, temperature controller, material liquid inlet and outlet, medium inlet and outlet (inlet and oil discharge), vent port (oil overflow hole), etc.
15. Material: the inner tank is SUS304 or SUS316L; the jacket is Q235-B or SUS304; the outer protective shell is SUS304.
16. The openings of the inlet and outlet nozzles and the welds of the inner tank adopt the arc transition of flanging technology, which is smooth and easy to clean without dead ends, and has a beautiful appearance.