Complaint
| Product Type | 321 Stainless Steel Sheet, 321 Stainless Steel Plate |
| Specification | ASTM A240 / ASME SA240 |
| Dimensions | Cold rolled 321 Stainless Steel Sheet 4ft*8ft [1219*2438mm] |
| Hot rolled 321 Stainless Steel Plate 5ft*20ft , 6ft*20ft [1500*6000mm 1800*6000mm 2000*6000mm] | |
| Thickness | 0.6 to 80 mm Thk |
| Width | 1219mm 1500mm 1800mm 2000mm |
| Length | 2m, 2.44m, 3m,6m or as required |
| Finish | SATIN, 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), No.1 finish hot rolled, 1D, No.4, BA, 8K, hairline, brush, mirror etc. |
| Our Service | Laser Cutting , bending , welding, polishing |
| Forms / Shapes | Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Other Trade Name of 321 Stainless Sheet | SS 321, SUS 321, Inox 321, DIN 1.4541, UNS S32100, AISI 321, SAE 321 Sheet |
| Other Grade we supply | 201 202 304 304L 304H 309S 310S 310H 310Si2 316L 316Ti 316LN 317L 321 347 409L 410 410S 416 420 430 431 436L 439 441 443 444 S31803 S32750 904L S30815 S31254 C276 C4 600 625.etc |
Grade 321 / 321H Stainless Steel Sheet UNS S32100 overview
321 stainless is a titanium stabilized grade commonly used for service in the 1000-1600°F temperature range. For service temperatures up to about 1600°F, a stabilizing treatment at 1550-1650°F, air cool, may be used to provide optimum resistance to intergranular corrosion and to polythionic acid stress corrosion cracking.
321 stainless is readily welded by all common methods including submerged arc. Appropriate weld fillers are AWS ER347 bare wire and E347 covered electrodes. 321 stainless is similar in machinability to 304 stainless steel. It has a machinability rating of 45% relative to AISI B1112.
Produc Forms : Sheet, plate , Coil , Strip .wire , Pipe, Tube ,Bar , Profile, Round, Flat, Square, Hexagonal
Chemical Composition of 321 stainless steel
Chemical Composition (wt%) limits as specified in ASTM A240 and ASME SA240*.
| Element | 321 |
| Carbon | 0.08 |
| Chromium | 17.0-19.0 |
| Nickel | 9.0-12.0 |
| Manganese | 2.00 |
| Silicon | 0.75 |
| Nitrogen | 0.10 |
| Phosphorus | 0.045 |
| Sulfur | 0.030 |
| Titanium | 5(C+N) min / 0.70 max |
Mechanical Properties of 321 stainless steel
Mechanical property requirements for annealed product as specified in ASTM A240 and ASME SA240.
| Property | 321 |
| Yield Strength, min. (ksi) | 30 |
| Tensile Strength, min. (ksi) | 75 |
| Elongation, min. (%) | 40 |
| Hardness, max. (Rb) | 95 |
Grade Specification Comparison of 321 series
Approximate grade comparisons for 321 stainless sheets of steel are given in table 4.
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
|---|---|---|---|---|---|---|---|
| BS | En | No | Name | ||||
| 321 | S32100 | 321S31 | 58B, 58C | 1.4541 | X6CrNiTi18-10 | 2337 | SUS 321 |
| 321H | S32109 | 321S51 | - | 1.4878 | X10CrNiTi18-10 | - | SUS 321H |
| 347 | S34700 | 347S31 | 58G | 1.4550 | X6CrNiNb18-10 | 2338 | SUS 347 |
Possible alternative grades to grade 321 stainless sheets of steel are given Belows
| Grade | Why it might be chosen instead of 321 |
|---|---|
| 304L | The requirement is for resistance to intergranular corrosion, not for high-temperature strength |
| 3CR12 | Only a mild "high temperature" environment is present… up to about 600 °C. |
| 304H | Only a mild "high temperature" environment is present… up to about 800 °C. |
| 310 | The temperature of the operating environment is up to about 1100 °C - too high for 321 or 321H. |
| S30815 (253MA) | The temperature of the operating environment is up to about 1150 °C- too high for 321 or 321H. |
