Complaint
| No. | Item | PMZ2016H |
| 1 | Size of machine(mm) | 5000x2700x2800mm |
| 2 | Number of machine bed frame | 1 Set |
| 3 | Number of Gantry frame | 1 Set |
| 4 | Number of Spindle heads | 1 Set |
| 5 | Air-actuated control System | 1 Set |
| 6 | Hydraulic control System | 1 Set |
| 7 | Automatic Chip removal | 1 Set |
| 8 | Circulation Cooling system | 1 Set |
| 9 | Electrical System | 1 Set |
| 10 | The part responsible by purchaser | Embedded plates and anchor bolts required for the cement foundation and equipment of the installation site shall be prepared according to the foundation drawing provided by the supplier |
| 1 | CNC system | PLC control system |
| 2 | Driving system | Panasonic servo motor |
| Item | Model | Unit | PMZ2016H |
| Max working size | Length x width | mm | 2000×1600 1 Pcs |
| 1000×1600 2 Pcs | |||
| 1000×800 4 Pcs | |||
| Overlay thickness | mm | 120 | |
| Drilling spindle | Number of spindle | piece | 1 |
| Model of spindle | BT50 or BT40 | ||
| Speed of spindle | r/min | 3000 rpm Stepless speed inverter | |
| Feeding type | Hydraulic self-controlled stroke drilling spindle head | ||
| Feeding travel | mm | 180 | |
| Drilling diameter | mm | Φ12-Φ50 | |
| Main motor power | KW | 22 | |
| Workpiece hydraulic clamping | Number of clamping cylinder | Pcs | 12 |
| Clamping power/piece | KN | 7.5 | |
| Clamping way | Foot switch control | ||
| Hydraulic pump pressure | MPa | 6 | |
| Hydraulic oil tank volume | L | 100 | |
| Electric control | Control type | PLC+IPC | |
| X axis servo motor | KW | 1.5 | |
| Y axis servo motor | KW | 1.5 | |
| Motor power of hydraulic pump | KW | 2.2 | |
| Drilling precision | Drilling precision | mm | ±0.5mm |
| Re-positioning precision | mm | ±0.1mm | |
| Cooling type | Forced circulating water cooling | ||
| Chip removal method | Flat chain automatic chip conveyor | ||
| Machine size | LxWxH | mm | 5000x2650x2800 |
| Machine weight(appx) | T | 6 | |
| 1 | Power | three-phase and four-wire system |
| 2 | Voltage | 415V±10% |
| 3 | Frequency | 50Hz |
| 4 | Working Temperature | 0ºC-40ºC |
| 5 | Relative humidity | <90% non-condensing |
| 6 | Compressed air | Voltage:0.4MPa |
| Commodity of Main Accessories | Picture | Detail description |
| Machine Bed Frame | Application: The platform on which the workpiece works. The workpiece is placed on the base support bar and clamped by the clamp cylinder to fix the workpiece. The bed is made of square tube welding, and the precision is stable after tempering heat treatment to remove stress.The two sides of the bed are parallel with two linear guides, and one side is equipped with a high precision ball screw.The sliding blocks on both sides of the guide rail are equipped with movable numerical control sliding platforms.The longitudinal movement of the CNC sliding table is driven by a servo motor. | |
| Gantry-moving frame | The gantry adopts square tube welded structure, and the stress is removed by tempering heat treatment.The two legs are mounted on the numerical control sliding table of the bed body respectively, and move longitudinally along with the numerical control sliding table.The front of the cross beam is provided with two linear guide rails, and a precision ball screw is provided above the cross beam.The ball screw is equipped with a CNC sliding plate that can move laterally.The CNC slide is driven by the servo motor to realize the transverse movement of the ball screw. | |
| Spindle Head unit | Drive mode: hydraulic drive. The power head box adopts casting structure, and the stress is removed by aging treatment.The spindle has a certain distance to drill down, so the bit length is not limited.Bit feed is: fast forward - work - fast back.Just return to the position before the work, and move horizontally to drill the next hole, so save time. | |
| Y axis moving unit | Drive mode: servo motor drive. Transmission mode: precision screw transmission. Protection measures: sheet metal cover to prevent the servo motor from dust pollution. | |
| X axis moving unit | Drive mode: servo motor drive. Transmission mode: precision screw transmission. Protection measures: sheet metal cover to prevent the servo motor from dust pollution. | |
| CNC electrical cabinet | Application: Control system. This machine tool numerical control system adopts PLC and servo motor control, powerful function, simple operation.With processing rehearsal and review functions, the operation interface has man-machine dialogue, error compensation, automatic alarm functions | |
| Hydraulic System | Application: Power source of equipment. Components: three-phase asynchronous motor, accumulator, oil tank, hydraulic pump. | |
| Automatic chip removal and circulating cooling system | It is equipped with an automatic stainless steel chain chip conveyor and a chip conveyor; it is cooled by coolant, its flow rate can be adjusted, and the coolant can be circulated automatically. | |
| Item | Name | Specifications | Brand |
| 1 | Linear guide | HGW35CA2RxxxxZACII | HIWIN,Taiwan |
| 2 | Linear guide | HGW45CA2RxxxxZACII | HIWIN,Taiwan |
| 3 | Ball screw | R40-10T3-FSI-xxxx-xxxx-0.05 | TBI,Taiwan |
| 4 | Ball screw | R40-10T3-FSI-xxxx-xxxx-0.05 | TBI,Taiwan |
| 5 | PLC | FX2N | Mitsubishi,Japan |
| 6 | IPC | Qitian commercial | Lenovo,China |
| 7 | Servo motor | Panasonic, Japan | |
| 8 | Servo driver | Panasonic, Japan | |
| 9 | Inverter | ATV312HU40N4 | ENC,China |
| 10 | Gear reducer | RF77DVI12M4 | Lingwei, china |
| 11 | Inner shaft oil pump motor | 2.2kw | CHYUN, Taiwan |
| 12 | Control Valve | DHQ-013/C/I-IX24DC | Atos, Italy |
| 13 | Cooling chip remover | PMZ2016LP | China |
| 14 | Lock screw nut | S-FM30x1.5 | Jiaan, china |
| 15 | Coupling | D28-8/D22-6 | Bolian, China |
| 16 | Ball screw bearing | 7206AC | Haerbin bearing |
| 12 | Button | Shneider, France | |
| 13 | Breaker | Schneider (France) | |
| 14 | Motor air switch | Schneider (France) | |
| 15 | AC contactor | Schneider (France) | |
| 16 | Thermal relay | Schneider (France) | |
| 17 | Small relay | Weidmüller (Germany) | |
| 18 | Servo transformer | Lamp(China) | |
| 19 | Control transformer | Lamp(China) | |
| 20 | Power Supply | MEAN WELL,Taiwan | |
| 21 | Proximity switch | LANBAO, China | |
| 22 | Cable | China | |
| 23 | Twisted-pair shielded cable | HELUKABEL, Germany | |
| 24 | Buttons, knobs, indicator lights | Siemens APT, Germany | |
| 25 | Hydraulic solenoid valve | China |
| Commodity | Name | Qty | |
| Package list | Drilling machine | 1 set | |
| Electric cabinet(contain system) | 1set | ||
| Hydraulic station | 1set | ||
| Chain plate type automatic chip remover (including trolley) | 1set | ||
| Technical file | Technical file | Manual Book | 2 set |
| Quality certificate | 1set | ||
| Inverter manual book | 1set | ||
| Gear reducer manual book | 1set | ||
| Chip remover manual book | 1set | ||
| Software | Programming disk | 1set | |
| Spare parts list | Fuse holder | 3A,5A,10A | 5 pcs each |
| Approach switch | 5DP | 5pcs each | |
| Approach switch | 5DP2 | 3pcs each | |
| Hex Wrenches | 1set | ||
| Machinery instruction | 1set | ||
| Electrical manual instruction | 1set | ||
| Packing list | 2sets Attached after the instruction | ||
| Certificate of conformity | 2set Attached after the instruction | ||
