Description
CNC Cutting Machine Series
Loading, Deliver, Cutting & Break off the table - 4 in 1
Loading, Delivery & Cutting - 3 in 1
Loading & Cutting - 2 in 1
How to know if one glass cutting machine is good or not?
Everyone would like to get a good glass cutting machine. But how to know if it is good or not?
Now, we are going to share with you some information and hope it is helpful to you.Firstly, let's see the countertops
All the countertops are made of PVC resin plate, with high hardness, no deformation, waterproof, and oil-proof. Don't choose the foam board, because the disadvantage of it, is easy to deform. Also, the shortcomings of density boards are fear of water & oil, high humidity, and easy deformation. The entire surface of our PVC resin board is processed by a processing center, and the surface is very smooth. The unprocessed countertop has poor flatness. When cutting 3mm thick glass, the glass is easy to crack. The thinnest glass thickness that our machine can cut is 2mm. Now, let's move on to the whole frame structure
The whole frame is annealed after welding. The purpose of annealing treatment is to release the internal stress of steel welding and prevent deformation during later use, thereby affecting the cutting accuracy. Without annealing heat treatment, the cutting accuracy will be greatly reduced.
The supporting surface of the whole machine for installing the linear guide rail is processed, and the beam is also annealed steel beam. If you use aluminum beams, it will lead to poor cutting accuracy and poor stability. The cutting accuracy of our cutting machine can be guaranteed to be ≤0.2mm. When the machine sucks glass, it works with a telescopic arm, and the machine does not move back and forth. We designed the linear guides on both sides to be used flat, and the linear guides used in the flat can bear even force, long life, and good stability. If it is used upright, only the upper side is stressed, and the machine makes a lot of noise when cutting glass.Lastly, let's see the configurations of the main parts- Japan Panasonic Sensor
- German Bohle cutter head
- American Honeywell Electrical components - Relay
- Taiwan AirTAC air cylinder
- Taiwan Meanwell Power Supply
- Japan Mitsubishi PLC
- Two motor heads to drive the cutting head
- The whole machine is free to move, and the 360-degree rotation.
Parameters of the cutting machine | Technical Parameters | TYJT-2420 | TYJT3628 |
| Dimensions | 3630*4700*1400mm | 3910*4700*1450mm |
| Height of the Working Table | 850mm | 850mm |
| Glass Max Processing Size | 2440*2000 | 3660*2800 |
| Cutting Thickness | 2-19mm (air pressure control) | 2-19mm (air pressure control) |
| Cutting Speed | 0-180m/min | 0-180m/min |
| Voltage & air pressure | 380V/50HZ, 0.6MPA | 380V/50HZ, 0.6MPA |
| Loading Speed | 15-40 seconds | 15-40 seconds |
| Installed Power | 11.8 KW | 11.8 KW |
| Net Weight | 3000KG | 3100KG |
Parameters of the glass break-off table
| Technical Parameters | TYJT-2420 | TYJT3628 |
| Dimensions | 2500*2000*810mm | 2600*4020*810mm |
Details Showing
Picture Showing
CE Certifications
Our other products
We are available for any questions that you may have, please feel free to contact me!
Complaint
