Description
pulse generator source measure meter sensor matererials I-V curve charateristics testing pulse smu
IntroductionP series pulse source measure unit is based on DC digital source measure meter, and it has all function of screen touch,combines the useful features of a digital multimeter (DMM), power supply, true current source, electronic load and pulse generator, all into a single, tightly synchronized instrument in a compact form factor. Max voltage 300V, and Max pulse current 10A. It also support four-quadrant working.Therefore, it is widely used in electrical characteristics tests. It applies to all kinds of materials and device test like modern semiconductor, Nanometer materials, organic semiconductor, electronics, and other small size, low power devices.Characteristics- 8 inch Touch Screen, graphical operation
- LIV,PIV software quickly testing
- High-accuracy 0.1%,resolution reach five figure and half.
- Four-quadrant operation, wide range: min currrent 1pA, and max voltage 300V. Min pulse width 200uS
- Various scanning modes, support linear, exponential and user-defined scanning
- Support USB storage and export
- Support multiple communication interfaces RS-232/GPIB/LAN
Voltage and current accuracy: (Different models have different voltage and current ranges, please refer to the selection guide )voltage and current range:Voltage
| Source
| Measure
|
Range
| Programming resolution | Accuracy±(% rdg.+ V) | Programming resolution | Accuracy±(% rdg.+ A) |
| 300mV | 30uV | 0.1%±300uV | 30uV | 0.1%±300uV |
| 3V | 300uV | 0.1%±500uV | 300uV | 0.1%±500uV |
| 30V | 3mV | 0.1%±3mV | 3mV | 0.1%±3mV |
| 300V | 30mV | 0.1%±30mV | 30mV | 0.1%±30mV |
Current
| Source
| Measure
|
Range
| Programming resolution | Accuracy±(% rdg.+ V) | Programming resolution | Accuracy±(% rdg.+ A) |
| 100nA | 10pA | 0.1%±0.5nA | 10pA | 0.1%±0.5nA |
| 1uA | 100pA | 0.1%±3nA | 100pA | 0.1%±3nA |
| 10uA | 1nA | 0.1%±5nA | 1nA | 0.1%±5nA |
| 100uA | 10nA | 0.1%±50nA | 10nA | 0.1%±50nA |
| 1mA | 100nA | 0.1%±300nA | 100nA | 0.1%±300nA |
| 10mA | 1uA | 0.1%±5uA | 1uA | 0.1%±5uA |
| 100mA | 10uA | 0.1%±20uA | 10uA | 0.1%±20uA |
| 1A | 100uA | 0.1%±2mA | 100uA | 0.1%±2mA |
| 3A | 300uA | 0.1%±3mA | 300uA | 0.1%±3mA |
| 10A | 1mA | 0.1%±5mA | 1mA | 0.1%±5mA |
Pulse technical parameters: | Max current | Max pulse width | Max duty ratio |
| 100mA@300V | DC,no limit | 100% |
| 1A@30V | DC,no limit | 100% |
| 1A@300V | 5mS | 3% |
| 3A@100V | 10mS | 5% |
| 10A@30V | 1mS | 5% |
Supplement: min programmable pulse width is 200us, and its figure is higher in some part pulse range. Pulse width programmable resolution is 20us, pulse width accuracy is ±10us. programming. Other technical parametes:Source range: in DC mod, max output power is 30w; in pulse mode, the max output power reach300w. Four-quadrant source mode or hydrazine mode.;Over range: 105% range, source and measurementStable load capacitance: <22nFBroadband noise (20MHz) : 3mV RMS (typical value), <20mV vp-p (typical value) Max voltage between FORCR HI and SENSE HI is 3V;Max voltage between FORCR LO and SENSE LO is3V;Cable protection voltage: output impedance 1K ω, output voltage offset <10mVMax sampling rate: 100000 S/ sTrigger: support IO trigger input and output, trigger polarity can be configured;Output interface: panel interface;Communication connector: RS - 232, GPIB, LAN;Power:AC 100~240V 50/60Hz;Working environment:25±10ºC;Size:106mm(high)× 255mm(width)× 425mm(length);Warranty:1year;Pulse Source meter P300 Working Quadrant DiagramApplications - Nanometer material properties test, graphene, nanowires, etc
- Organic material property test, electronic ink, printing of electronic technology, etc
- Energy and efficiency test: LED / AMOLED, Solar cells, DC-DC converters, etc .
- Discrete semiconductor devices feature test, resistor, diode, light emitting diodes, zener diodes, the PIN diode, BJT transistor, MOSFET, SIC, etc
- Sensor characteristic test: Resistivity, Hall effect, etc
FactoryFAQ:1. Q:Precise is direct factory or trade company?
A: Precise is a factory, and all the SMU R&D are Precise team and manufactured by Precise. 2. Q:Sample order is available?
A:Yes, we accept sample order.
3. Q:Do you supply software for SMU operation?
A:Yes, we can design it as customer's requirement. 4. Q:whats the delivery period?
A:usually, it is around 30 days, and it is also related with order qty. 5. Q:what's the warranty?
A:warranty is 12 month. 6.Q: what's the shipping way?
A:for sample order, usually shipping by international express like DHL, FEDEX, UPS, EMS and so on. If qty is more, by air is also a good choice.
Complaint
