Procedure: Feed the capsule cups one by one or automatically into the mold slot (stack the empty capsules together or place the cups manually) Fill the empty cup with nitrogen No cup, no filling Lift the powder into the hopper (vacuum powder feeder, optional installation function) Filling powder Clean the rim Fill the filled capsule cup with nitrogen Automatically take the sealing film No film and no sealing test Pneumatic sealing Finished capsule discharge
Filling: Material contact part 304 stainless steel No filling without cups to prevent waste of materials Equipped with servo motor driven filling, high precision filling, error is less than plus or minus 0.05-0.1g. It can be connected with the feeder to automatically transport coffee powder (optional function) The hopper can be rotated for easy removal, making it easy for the operator to clean and replace the powder With cleaning function of cup edge, ensure tight sealing Filling volume can be adjusted
Sealing: Pneumatic sealing, each head is controlled by an independent cylinder Special customized sealing device, sealing surface uniform, smooth and beautiful The head is made of first-class brass with good thermal conductivity and stable temperature Adopt Omron temperature controller, solid state relay matching control, high quality accessories Sealing time, temperature and pressure can be adjusted
Security: Equipped with safety dust cover Optional: open or shut the door during operation (this function can be opened or closed freely) Equipped with working indicator light Equipped with air gun Protection: compressed air connection protection, no connection air compressor, the machine does not start or stop Protection: air pressure protection detection, air pressure is insufficient, the machine stops, prevent pulling damaged parts Protection: three-phase electrical phase sequence protection detection, incorrect connection, the machine does not start Protection: cylinder protection detection, detection of sealing cylinder running state, machine shutdown, prevent pulling damaged parts
Operation: Siemens PLC and touch screen control, one button start, real-time monitoring English and Chinese operation interface, other languages can be customized Automatic mode, one key start, convenient manual operation Debugging mode, convenient for personnel to detect the running state of the equipment Parameter setting (password can be set), permanent storage, do not worry about data loss Real-time counting, can set the production quantity, reach the preset number of equipment automatic shutdown