Complaint
Specifications Of Press Line T80 | |
PRESS | |
Press capacity | 80 tons |
Installed power | 16KW |
Stroke | 180mm,240mm,260mm fix (It can be customized) |
Electronic PLC | Mitsubishi |
Main motor | Siemens |
Adjustable speed | From 35 to 70 strokes per minute |
Number of solenoid value with adjustable pressure | 12 |
Foil feeding | Electronically controlled with servo motor |
Feeder level adjustable | Electric |
Feeder level from the bed plate | from 150 to 300 mm |
Bed plate dimensions | 1220 × 900 mm |
Ram face dimensions | 750 X 520MM |
Maximum mould height with ram DOWN adjustable UP | 420 mm |
HOLE DIMENSIONS SIDE BLOCK BOTTOM SURFACE | Φ18 |
SIZE OF CENTERING HOLE (DIAMETER x DEPTH | Φ50 |
RAM adjustment | 80 mm |
Maximum mould dimensions | 1400×900 mm |
Height from the floor to mould side | 910 mm |
ADJUSTABLE WORK BLOCK x2 | 3 |
| DECOILER | |
| Maximum width of foil passage | 950 mm |
| Outer diameter for aluminium coil | 1000 mm |
| Width of the coil | From 180 to 950mm |
| Coil weight | 1000 Kg Max |
| Coil lifting system | Fixed support |
| Installed power | 4.0 KW |
| Main motor | Siemens |
| Electronic PLC | Mitsubishi |
| Low voltage electrical | Schne-ider |
| Pneumatic Part | SMC |
| Unwinding control | Electronic inverter controlled speed |
| Braking system inner diameter for aluminium foil | Electo-magnetic braking system electronically controlled |
| Inner diameter for aluminium coil | 3inch or 6inch Additional expansion shafts or shafts with different diameter are available on request. |
| Coil core clamping | Expanding removable shaft with safety chucks. |
| Embossing Device | On customer request |
| STACKER | |
| Main conveyor belt height | Adjustable by screw: 1186 mm for Press T80 |
| Main conveyor belt width | As per samples |
| Containers' stack maximum height | 400 mm |
| Collecting lifts | Double speed: normal & fast for the lifting-up |
| Electronic PLC | Mitsubishi |
| Main motor | Siemens |
| Low voltage electrical | Schne-ider |
| Ways number | 1-2-3-4 (on request) |
| Air flow in m3 | 3000 m3/h |
| Installed power | 2 KW |
| SCRAP COLLECTION SYSTEM | |
| Scrap Baler Capacity | 30 tons |
| Power consumption | 5.5 KW |
| Main motor | Siemens |
| Low voltage electrical | Schne-ider |
| Aluminium block size | 400 × 400 × 400 mm |
| Total Line Landscape | 6.5*6*3.56 meters (L*W*H) |
