Complaint
| Test Property | Requirements(Standard) | Test Method | Test Result | Final Result | |||
| Thickness of the element, T | T average≤0.5mm, relative to nominal value, T max-T min≤0.5mm | EN13329 Annex A | T nominal value=8mm | T average =8.15mm | T max =8.3mm | T min =8mm | Qualified |
| Length of the surface layer, L | For the nominal values given, no measured value shall exceed: L≤ 1500mm; L≤0.5mm | EN13329 Annex A | L nominal value= 1218mm | L average= 1217.95mm | Qualified | ||
| Width of the surface layer, W | W average≤0.10mm, relative to nominal value, Wmax-Wmin≤0.20mm | EN13329 Annex A | W nominal value=199mm | W average =198.99mm | W max =199.02mm | W min =198.96mm | Qualified |
| Squareness of the elements, Q | Q max ≤ 0.20mm | EN13329 Annex A | Q max =0.12mm | Qualified | |||
| Straightness of the surface layer, S | S max ≤ 0.30mm/m | EN13329 Annex A | S max = 0.16mm/m | Qualified | |||
| Flatness of the elements, F | Maximum single values: Fw concave ≤ 0.15%, Fw convex ≤ 0.20%, F l concave ≤ 0.50%, F l convex ≤ 1.00% | EN13329 Annex A | Fw concave=0.10% | F l concave=0.20% | Qualified | ||
| Openings between elements, O | O average ≤ 0.15mm, O max ≤ 0.20mm | EN13329 Annex B | O average= 0.05mm | O max = 0.15mm | Qualified | ||
| Height difference between elements, H | H average ≤ 0.10mm, H max ≤ 0.15mm | EN13329 Annex B | H average= 0.05mm | H max =0.10mm | Qualified | ||
| Test Property | Requirements(Standard) | Test Method | Test Result | Final Result | |
| Dimensional variations after changes in relative humidity δL, δW | δL average ≤ 0.9mm, δW average ≤ 0.9mm | EN13329 Annex C | δL average = 0.5mm | δW average =0.7mm | Qualified |
Light fastness | Blue wool scale, ≥ Level 6 | EN ISO 105-B02 | Level 6 | Qualified | |
Surface soundness | ≥1.00N/mm2 | EN13329 Annex D | >1.00N/mm2 | Qualified | |
Abrasion resistance | Class 32,AC4 | EN13329 Annex E | Average IP-value:4000,Abrasion class AC4, Class 32 | Qualified | |
Impact resistance | IC1 | EN13329 Annex F | Large diameter ball 1600mm, small diameter ball: 8N. Clasification: IC1 | Qualified | |
Resistance to staining | 5,(groups 1 and 2) 4, (group 3) | EN 438 | 4,(group 3 ) | Qualified | |
| Effect of a furniture leg | No damage shall be visible, when tested with foot type 0 | EN424 | No visible changes | Qualified | |
Effect of a castor chair | No damage or visible change in appearance | EN425 | No visible changes | Qualified |
Static indention | No visible damage | EN433 | No visible changes | Qualified |
Thickness swelling | ≤18.0% | EN13329 Annex G | 12.00% | Qualified |
Fire Resistance | Flame retardant B1 | DIN 4102 | Flame retardant B1 | Qualified |
| Resistance to Cigarette burns | ≥Degree 4 | EN438 | Degree 5(NO. visible change) | Qualified |
Formaldehyde Release | EN717-1 | 1.0mg/L | Qualified |
