Factory Direct Supply Coal Mine Quarry Special Dust Removal Equipment Fog Gun Machine

Min.Order: 1
Product origin: Zhengzhou, Henan, China
Infringement complaint: complaintComplaint
US$ 399 ~ 6000

Description
   Dedusting sprinkler and fog gun machine for construction site
1.Machine Application :
Fog cannon machine is also called "fog gun machine", "cannon fog machine" , "Dust removal artifact" and "mist shooter". It can be directly installed at the rear of the sprinkler, and can atomize water into water mist equivalent to dust through high pressure. , accurately projecting the mist onto the target, it has a long range and wide coverage, and has a good suppression effect on dust particles below 200 microns in the air. At the same time, the spray volume can be adjusted according to actual needs, compared with ordinary sprinklers , the fog cannon can save 30%~50% of water and improve the utilization rate of water resources (ordinary sprinklers just spray water along the nozzle to suppress the dust on the road, and cannot effectively and quickly solve the dust in the air.)

The dust removal equipment of the fog cannon is composed of a fan device (blowing fog particles), a pitching mechanism (adjusting the elevation angle of the fog cannon), a slewing mechanism (rotation direction), a base (supporting structure), a water supply system (waterway), an electrical and control system (electrical control) In order to ensure the normal use of the equipment at a low temperature of zero degrees Celsius in winter, thermal insulation materials and drainage devices can be installed to achieve dust reduction in low temperature weather in winter.


The working principle of the dust-removing fog cannon is to use the water pump to pressurize and atomize the nozzle, and then the fan device pushes the fine mist particles to a longer distance; the wind converts the water into the atomization effect of water mist spray, increasing the water mist and dust. The contact and collision improve the dust removal efficiency. The fine droplets combine with the dust in the air and fall to the ground under the action of gravity, so as to achieve the effect of dust reduction and air purification.

In addition to dedusting and purifying the air on urban roads, the dust-removing fog cannon can also be used in many industries and scenarios, such as construction sites, earthworks, steel mills, power plants, mines, quarries, coal yards and other environments. It can also be used for humidification and cooling of urban pavements, playgrounds, and livestock breeding sites in high temperature weather in summer; in terms of epidemic prevention and disinfecting, fog cannons also have significant disinfecting ability, spraying pesticides in agricultural fruit forests to disinfect insects, and large-scale disinfection of public places. , especially the large-scale epidemic prevention and sterilization of the new crown virus, and the fog cannon has a high operating efficiency.

2.Machine Parameter :
 
ModelRange
(M)
Fan Power
(KW)
Pump Power
(KW)
Total Power
(KW)
Pitch angleRotation anglesprinklernoise
(dB)
Box weight
(KG)
Split typeBox typeStandardCenter nozzle
 (optional)
SC-WP2020~252~1.52~1.1≤4-5~35°-10~40°0~350°single ring 1211≤60260
SC-WP3535~402~32~2.2≤6-5~35°-10~40°0~350°single ring 1211≤65330
SC-WP4040~502~7.52~3≤13-5~35°-5~35°0~350°single ring 2415≤68420
SC-WP6060~702~152~4≤21-5~35°-5~35°0~350°single ring 3015≤75600
SC-WP7070~802~222~5.5≤30-5~35°-5~35°0~350°single ring 3631≤75820
SC-WP8080~904~372~7.5≤46-5~45°-5~45°0~350°Double rings 7031≤801500
SC-WP100100~1104~552~11≤68-5~45°-5~45°0~350°Double rings 10031≤851600
Remarks: The value of the range is the reference value of the windless state test
                The value of the noise is the reference value measured 20 meters away from the machine


3.Machine Pictures:



Matters needing attention:
1. During operation, it is strictly forbidden to press the start button of the water pump first, and the water pump must be started after the fan is running normally, so as to avoid the liquid backflow into the axial flow fan and the nozzle due to the first start of the water pump.

2. After the fan is running, do not approach the air inlet of the axial flow fan, and personnel are not allowed to stand at the air outlet of the fan.








Product Tag:
Related categories:
Scroll to Top