Crop Waste Granulator Jiu'an 160kw Wood Pellet Mill Manufacturer Direct Sales

Min.Order: 1
Product origin: Jinan, Shandong, China
Infringement complaint: complaintComplaint
US$ 2903 ~ 40646

Description

Crop waste granulator Jiu'an 160kw wood pellet mill manufacturer direct sales

Product Parameters

ModelAuxiliary power(KW)Output (kg)
2603/22-30300
260(Reducer type)3/22-30300
3803/45-55400
4603/55-75500-700
5603/90-1101t
6003/110-1301.5t
7003/1602t
8503/2003t

Product Description

Ring mold granulator belongs to biomass granulation equipment or feed granulation equipment. Is wood chips, bamboo powder, straw, crops and other comminuted materials directly pressed particle processing machinery equipment. Ring mold granulator is the production of biomass particles, feed particles mechanical equipment, its performance to a large extent determines the biomass particles, feed processing output, in the process of particle processing occupies a very important position.

Scope of application

1. Feed particle processing, such as: rice husk, sunflower seed husk, peanut husk, and other melon and fruit husks; Grass, grass, etc

2. Wood pellet processing, such as branches, tree rods, bark and various wood scraps;

3. Straw particle processing, such as corn straw, wheat straw and other crop straw widely used in feed processing plants, wood pellet processing plants, fuel plants, organic fertilizer processing plants, chemical plants, etc., is a small investment, quick effect of compression and dense molding equipment.

Particle comparison with coal

1. Calorific value of biomass pellet fuel and ash content after combustion are about 10% lower than that of medium coal. But biomass pellet fuel in the working condition of energy burn out, and coal can not burn out, cinder residue 10%~15% combustible components. Therefore, the calorific value of the two is equivalent in practical use.

2. Solid emissions of biomass pellet fuel are lower than coal, reducing the cost of slag discharge and environmental pollution. Solid emissions of biomass pellet fuel are all ash, accounting for about 0.4%~7.0% of the total weight; The solid emissions from coal combustion are a mixture of ash, alkali and residual coal, about 25 to 40 percent of the total weight.

3. The degree of air pollution and boiler corrosion of coal is much greater than that of biomass pellet fuel. Soot contains a large number of granular C and toxic SO2, CO and other corrosive gases. The main component of biomass pellet fuel is C-H organic matter, there is no granular C and SO2 gas in flue gas, mainly C-H volatile gas, its SO2, CO emissions close to zero; The smoke color of combustion is less than Ringelmann 1 level, which will greatly reduce air pollution and carbon dioxide emissions. Biomass pellet fuel is known as "clean fuel" in the international reputation.

4. The cost and time of using biomass pellet fuel for boiler fuel is less than that of burning coal. A 0.5t boiler burning biomass pellet fuel costs 11% less than burning coal, saving 34% of time, a 0.5t boiler fuel costs relative to coal reduced 10%, saving 16% of time.

5. The continuous combustion time of general biomass pellet fuel is 8~10 times higher than that of soft bulk material, and it is in a stable and continuous combustion state.

 

Detailed Photos

Other product displays

Certifications

About us and FAQ

Jinan Huaqing Jiuan Automatic Control Equipment Co., LTD., the company is a professional R & D, manufacturing, production and sales of automatic wood pellet machine manufacturers, the main products are: Biomass pellet production line, flat mold wood pellet machine, ring mold wood pellet machine, feed pellet machine and a series of biomass fuel pellet machine equipment, this model is mainly for coarse fiber granulation, such as wood chips, sawdust, branches, trunks, straw and other wood waste, the product pressed out of the particles with high density, high combustion value, low ash and other characteristics. Automatic wood pellet machine is biomass new energy equipment, finished products used in thermal power generation, industrial boiler fuel, fuel plants, chemical plants, fireplaces, household equipment and other industry applications, reliable quality, stable operation, manufacturers direct sales, customized.

 FAQ

Q: What materials can be used for particles?
A: Sawdust, EFB, rice husk, rice straw, agricultural waste, grass, and other different types of biomass materials

Q: Which moisture content is suitable for granulation?
A: The most suitable moisture content is 10-15%.

Q: What size can be fed into the granulator?
A: Usually, it is necessary to have a diameter smaller than the output particle diameter.

Q: What is the warranty period for your machine?
A: 1 year

Q: What are the vulnerable parts of the granulator?
A: Roll shell and ring mold

Q: What is the density of the output particles
A: The particle density is 1.0-1.4g/cm3

 

 

Product Tag:
Related categories:
Scroll to Top