Pin Name | Pin Definition |
ANT | Antenna In |
VDD | Positive Power Supply |
GND | Ground |
DO | Data output |
EN | Optional output: 1, No Connect (default setting) 2, Battery Saving Mode: (Working mode in High level input) (Sleeping mode in Low level input) |
Parameter | Specification | Unit | Condition | ||
Min | Typ. | Max | |||
Carrier Frequency | 310 | 314.98 | 316 | MHz | IF = 220kHz |
Supply Voltage | 3.6 | 5.0 | 5.5 | V | 5.0v at default |
Supply current | 4.3 | 5.7 | 7.1 | mA | ASK |
4.5 | 5.9 | 7.3 | FSK | ||
Modulation Mode | ASK/FSK | ||||
RF sensitivity | -116 | dBm | 600bps(Manchester), dev=±40kHz | ||
Frequency Deviation | ±40 | kHz | |||
-3dB Bandwidth | 250 | KHz | |||
Data Rate | 1.2 | 9.6 | Kbps | ||
Turn on time from sleep | 3 | ms | |||
"L" level input/output level | 0 | 0.2 | mA | ||
"H" level input/output level | 2.6 | 5.5 | V | ||
Output leak current (H level) | 0 | 2 | μA | ||
Output voltage (L level) | 0.4 | V | IDATAL = 200μA | ||
Wave shaping output duty ratio | 45 | 50 | 55 | % | VIN (MIX) = 60dBmVEMFF or single tone |
Image Suppression Ratio | 35 | dB | |||
Operating Temperature Range | -40 | +85 | ºC |
Parameter | Specification | Unit | Condition | ||
Min | Typ. | Max | |||
Carrier Frequency | 430 | 433.92 | 435 | MHz | IF = 220kHz |
Supply Voltage | 3.0 | 5.0 | 5.5 | V | 5.0v at default |
Supply current | 4.6 | 6.1 | 7.6 | mA | ASK |
4.7 | 6.3 | 7.9 | FSK | ||
Modulation Mode | ASK/FSK | ||||
RF sensitivity | -116 | dBm | 600bps(Manchester), dev=±40kHz | ||
Frequency Deviation | ±40 | kHz | |||
-3dB Bandwidth | 250 | KHz | |||
Data Rate | 1.2 | 9.6 | Kbps | ||
Turn on time from sleep | 3 | ms | |||
"L" level input/output level | 0 | 0.2 | mA | ||
"H" level input/output level | 2.6 | 5.5 | V | ||
Output leak current (H level) | 0 | 2 | μA | ||
Output voltage (L level) | 0.4 | V | IDATAL = 200μA | ||
Wave shaping output duty ratio | 45 | 50 | 55 | % | VIN (MIX) = 60dBmVEMFF or single tone |
Image Suppression Ratio | 35 | dB | |||
Operating Temperature Range | -40 | +85 | ºC |