Complaint
Sun Hong Forming Fabric produced with imported Equipment 14m German Weaving machine. Wide weaving width makes sure the rate of finished products yields. Austria Automatic seaming machine obtains Average splice point and strong constructions and Norway 14.5m heat setting machine.
Our fabrics are available in a variety of woven patterns, mesh count, thread diameter, surface topography and air permeability upon your request. And the following is the most hot sale fabric supplied And the following is the most hot sale fabric supplied by Sun Hong.
| Type | feature | Application scenarios |
| Single layer/1.5 layer | Dehydration soon Large difference on both sides Poor wear resistance | Kraft paper corrugated paper |
| 2.5 layer | Slow dehydration Good paper quality Wear resistance Long service life | Various grades of paper |
| Triple layer | Uniform dehydration High retention rate Good paper quality | Various grades of paper |
2.5 layer Forming Fabric | ||||||||
| Fabric Code | Warp Mesh | Weft Count | Warp Diameter | Weft Diameter | Air Permeability/m3/m2h CFM | FSI | DI | |
| SH2B6408 | 71.5-72.5 | 67.5-68.5 | 0.15 | 0.18 0.12/0.22 0.22 | 4350 | 275 | 155 | 25.7 |
| 71.5-72.5 | 65.5-66.5 | 0.15 | 0.18 0.12/0.22 0.22 | 4600 | 290 | 152 | 26.3 | |
| 71.5-72.5 | 56.5-57.5 | 0.15 | 0.18 0.12/0.22 0.22 | 5800 | 370 | 135 | 29.0 | |
| 71.5-72.5 | 47.5-48.5 | 0.15 | 0.18 0.12/0.22 0.22 | 7900 | 500 | 119 | 33.0 | |
| SH2B5616 | 62.5-63.5 | 60.5-61.5 | 0.17 | 0.20 0.13/0.30 0.30 | 4500 | 285 | 139 | 23.9 |
| 62.5-63.5 | 59.5-60.5 | 0.17 | 0.20 0.13/0.35 0.35 | 3950 | 250 | 137 | 20.6 | |
| 62.5-63.5 | 53.5-54.5 | 0.17 | 0.20 0.13/0.35 0.35 | 5050 | 320 | 126 | 23.7 | |
| 62.5-63.5 | 47.5-48.5 | 0.17 | 0.20 0.13/0.35 0.35 | 6000 | 380 | 115 | 25.1 | |
| SH2B4216 | 47.0-48.0 | 47.0-48.0 | 0.22 | 0.22 0.13/0.35 0.35 | 6000 | 380 | 107 | 25.1 |
| 47.0-48.0 | 40.0-41.0 | 0.22 | 0.25 0.17/0.40 0.40 | 7000 | 445 | 94 | 25.1 | |
| SH2B3616 | 40.5-41.5 | 38.5-39.5 | 0.26 | 0.30 0.20/0.50 0.50 | 5500 | 350 | 89 | 18.8 |
| 40.5-41.5 | 36.5-37.5 | 0.26 | 0.30 0.20/0.50 0.50 | 6350 | 400 | 85 | 20.4 | |
| 40.5-41.5 | 34.5-35.5 | 0.26 | 0.30 0.20/0.50 0.50 | 7000 | 445 | 82 | 21.4 | |
Problem:
The mesh edge is worn too fast.
Solutions:
1. Try to increase the staggered width of vacuum box openings in turn.
2. Add normal pressure lubricating water to the edge of the vacuum box.
3. Apply stiffeners at appropriate positions.
4. Check whether the edge wiper plate and vacuum box have edges or gaps. In particular, the joint of the ceramic panel is a weak link.
5. Check whether the edge of each roll is seriously worn (the diameter becomes thinner after wear, so that the tension of the mesh is smaller than that of the normal mesh surface, further accelerating the wear)
SUN HONG INDUSTRIAL FABRIC with 400workers in-service, including the Special Product Development Team about 60 workers. Sun Hong Fabric focused on paper and pulp industry with cost-effective products and one by one design solution, help reducing energy consumption, increasing capacity while obtaining excellent ending paper property. We've been maintaining our commitment to serve you, your satisfaction is our pursuit.
1.Forming Fabric https://sunhong.en.made-in-china.com/product-group/dormXeQCbuhn/Forming-Fabric-1.html
2.Paper Machine Felt https://sunhong.en.made-in-china.com/product-group/dbYmvynchuVQ/Paper-Machine-Felt-1.html
3.Dryer Fabric https://sunhong.en.made-in-china.com/product-group/ZoUEKFQvCPWx/Dryer-Fabric-1.html
