Product Description JUTAI's infrared photo beam installation is very simple, it is compatible with 12VAC / DC and 24VAC / DC voltage, no matter what voltage your door machine is, a product can be easily handled, reducing inventory pressure. In addition, Haotai's infrared radiation support one-on-one working state and one-to-many working state. If the case is one-to-one, we provide a jumper cap. Just insert the jumper cap according to our operating instructions. The location, and the operating current in AC mode, makes it easy to implement the functional mode you want.
EXTERNAL ROTATION WIRELESS INFRARED BEAM SENSOR IS-30R Wireless Infrared Laser Photocell Beam Sensor with a wireless transmitter and there's no need to tunnel under the driveway, With external rotation 180 degree, Simply rotational align, More convenient and safe for door automation! Technology parameter: Power Supply Transmitter:2 x AA Alkaline Batteries (Supplied) Only replace with alkaline batteries; do not use rechargeable batteries with this product Receiver12 - 24V AC 12 - 30V DC Rotation Angle180 Degree Receiver Power Consumption30mA @ 12V DC Transmitter Battery LifeMinimum 2 years Battery Low IndicationAudible Beep Specified Operating Distance30m AlignmentAutomatic - 1m² @ 10m (circular area - assumes parallel surface) Output ContactFail-safe, N/C and N/O, potential free contact Output Contact3A @ 30V DC Non-inductive Operating Temperature-20°C - +60°C Operating Humidity0 - 90° Non-condensing Degree of ProtectionIp66 Housing MaterialPC(UV) Size113*46.79*47.72mm Features: 1.With external rotation 180 degree - Simply rotational align,easy installation, save labor installation cost. 2. The transmitter is wireless and battery-operated saving time and money. 3. 30 meters operating range - ideal for almost any entrance gate. 4. Fully ant-proof and weather-resistant enclosure for greater reliability. 5. Transmitter provides audible feedback for easy setup and battery-low indication. 6. Low power consumption throughout the system for greater efficiency. 7. Compatible with Intruder-detection Alarms for enhanced perimeter security. 8. Quick, easy installation with built-in laser beam alignment system. Two Pair photocell Anti-minimum interference distance: Installation: 1. Align the two holes in the case and lock two screws. 2. Put the battery inside(transmitter),thread the cable out(receiver). 3. Fix the screw. 4. Rotate the angle as required,and finally fix the bottom screw.