Complaint
| Model | RA1KL | RA2KL | RA3KL | RA6KL | RA10KL | ||
| Capacity | VA/W | 1000VA/800W | 2000VA/1600W | 3000VA/2400W | 6000VA/4800W | 10000VA/8000W | |
| Input | Nominal Voltage | 200/208/220/230/240VAC | |||||
| Voltage Range | 115~300VAC | 125~275VAC | |||||
| Power Factor | ≥0.97 | ||||||
| Frequency Range | 50Hz:46~54Hz; 60Hz:56~64Hz | ||||||
| Output | Voltage | 200/208/220/230/240(1±2%)VAC | 200/208/220/230/240(1±1%)VAC | ||||
| Frequency | 50/60Hz (Adjustable); 60Hz AC Mode: Follow AC Mode (AC Range 56~64Hz); Battery Mode: 60Hz (1±0.2%) | ||||||
| Wave Form | Pure sine wave | ||||||
| Power Factor | 0.8 | ||||||
| Harmonic Distortion | ≤3% THD (Linear load) ≤7% THD (Non-Linear load) | ≤2% THD (Linear load) ≤6% THD (Non-Linear load) | |||||
| Overload Capacity | 110%~150% maintain 30s then turn to bypass ourput; >150% maintain 300ms | Load <105% work consistant; 105%125%135% 0.5sec | |||||
| Current Crest Ratio | 3:1 | ||||||
| Connections | Terminal block | ||||||
| Efficiency | Battery Mode | 83% | 87% | ||||
| AC Mode | 85% | 88% | |||||
| Battery | Type | Sealed free maintenance lead acid battery | |||||
| Nominal DC voltage | 36VDC | 96VDC | 96VDC | 192VDC | 192VDC | ||
| Stansard Battery Cabinet | 3*100AH | 8*100AH | 8*100AH | 16*38AH | 16*38AH | ||
| Backup Time (Full Load) | Depens on the capacity of internal battery bank (24AH,38AH,65AH,80AH and 100AH optional) | Depens on the capacity of internal battery bank (24AH,38AH optional) | |||||
| Charge Current (Max) | 6.0A | 6.0A | 6.0A | 2.0A | 2.0A | ||
| Charge Voltage (VDC) | 41.1V±0.2VDC | 110V±0.6VDC | 110V±0.6VDC | 219.5V±1.1%VDC | 219.5V±1.1%VDC | ||
| Recharge Time | Depends on the capacity of internal battery bank | ||||||
| Bypass | Automatic Transfer | On overload and UPS failure | |||||
| Before UPS Power-on | YES | ||||||
| Transfer Time | 0 ms(from imain to battery and vice versa); Less than 4ms from inverter to bypass and vice versa | ||||||
| indicators | LCD Display | UPS status, Battery capacity, loading, Fault code (LCD: I/P &O/P voltage&frequency, Battery voltage) | |||||
| Audible | Bypass, Battery mode, Battery low, Overload, Fault | ||||||
| Communications | Intelligent RS232 serial port | Software support Windows family software, Linux, Sun network operating system, IBM Aix, Compaq True64 SGI IRIX, FreeBSD, HP-UX and MAC | |||||
| SNMP (Optional) | Remote control UPS through SNMP management and Internet | ||||||
| USB (Optional) | Windows family software and Mac OS | ||||||
| Environmental | Operating Temperature | 0~40ºC | |||||
| Operating Humidity | 0~95% (No condensing) | ||||||
| UPS dimension | L*W*H (mm)(UPS main body) | 482*380*88.4 | 482*448*88.4 | 482*448*88.4 | 632*482*133.4 | 632*482*133.4 | |
| L*W*H (mm)(Cabinet) | 638*507*775 | 612*525*1511 | 612*525*1511 | 718*595*1371 | 718*595*1371 | ||
| Weight(kg) | Net Weight (No battery) | 52.00 | 100.00 | 100.00 | 120.00 | 123.00 | |
RA series High frequency outdoor UPS is used In suburban district, remote road or mountain, severe environment such as areas with high temperature(-40ºC), severe dust, moisture, rain, mist erosion, poor grid power quality(voltage durative higher than 260V or less than 160V, Frequency abnormal change)
Features:
♦Provides a pure uninterrupted AC sine wave power supply for the outdoor communication / network equipment.
♦The use of high temperature, anti cold, salt spray, anti-corrosion, anti dust, waterproof, lightning protection design.
♦Advanced MCU micro processor control Technology, ensure long life reliability.
♦Excellent Protection against over voltage, overload, over current, overcharge and so on.
♦Strong anti-jamming capacity, Lightning, surge, short-circuit, network/fax/modem surge protection. Input L and N lines reverse wiring detection.
♦DC start function, input RFC reuses function.
♦Humanized bypass output adjustable.
♦Available to work with generators.
♦RS232 intelligent communication monitoring.
♦AS-400 Dry contact and SNMP cars remote intelligent control.
