Complaint
D series gear motor is composed with two-stage or three-stage gears. Input shaft and output shaft is inline.
Mounting position: footed mounting, flange mounting, both flange and footed mounting etc.
Thechnical data:
Output speed 10 ~ 800 rpm
Rated output torque 10 ~ 20000 Nm
Motor power 0.12 ~ 200 KW
Product Show
Product Specification
| Product features | |||||||
| 1. D series helical gear motor own rational design, compact construction, smaller size than cycloidal gearmotor at the same permitted torque. | |||||||
| 2. Little vibration and low noise, with high transmission efficiency. | |||||||
| 3. The products have been mainly used in chemical machinery, cement agitator machinery, printing and packaging machinery, mine and power transmission machinery, metallurgy etc. | |||||||
| General Technical data | |||||||
| Housing material | HT250 high-strength cast iron | ||||||
| Housing hardness | HBS190-240 | ||||||
| Pinion material | 20CrMnTiH | ||||||
| Gear material | 20CrMnTiH | ||||||
| Surface hardness of gears | HRC58°~62 ° | ||||||
| Gear core hardness | HRC33~40 | ||||||
| Input/output shaft material | 40CrMnTiH | ||||||
| Input / Output shaft hardness | HRC25~30 | ||||||
| Machining precision of gears | accurate grinding, 6~7 Grade | ||||||
| Lubricating oil | L-CKC220 (GB 5903-95) | ||||||
| Heat treatment | tempering, cementiting, quenching, etc. | ||||||
| Efficiency | 94%~96% (depends on the transmission stage) | ||||||
| Noise (MAX) | 60~68dB | ||||||
| Temp. rise (MAX) | 40°C | ||||||
| Temp. rise (Oil)(MAX) | 50°C | ||||||
| Vibration | ≤20µm | ||||||
| Backlash | ≤20Arcmin | ||||||
| Brand of bearings | China Top brand C&U,LYC,TMB or other brands requested, SKF….. | ||||||
| Brand of oil seal | CTY--- Taiwan or other brands requested | ||||||
| D ---- series helical gear motor | |||||||
| D-series single stages | |||||||
| Model | Output Shaft Dia. | Center Height | Output Flange Dia. | Power | Ratio | Permitted Torque | Weight |
| Solid (mm) | (mm) | (mm) | (kw) | (Nm) | (KGS) | ||
| D37 | 25k6 | 90h13 | 110/160 | 0.12~3 | 4~135 | 210 | 11 |
| D47 | 30k6 | 115h13 | 110/160 | 0.12~5.5 | 4~172 | 335 | 16 |
| D57 | 35k6 | 115h13 | 130/200 | 0.12~7.5 | 5~188 | 490 | 19 |
| D67 | 35k6 | 130h13 | 180/250 | 0.12~7.5 | 5~193 | 570 | 28 |
| D77 | 40k6 | 140h13 | 230/300 | 0.18~11 | 5~197 | 890 | 39 |
| D87 | 50k6 | 180h13 | 250/350 | 0.55~22 | 5~246 | 1660 | 65 |
| D97 | 60m6 | 225h13 | 350/450 | 0.55~30 | 5~290 | 3000 | 110 |
| D107 | 70m6 | 250h13 | 350/450 | 1.5~45 | 2~249 | 4550 | 200 |
| D137 | 90m6 | 315h13 | 450/550 | 3~55 | 5~220 | 9270 | 280 |
| D147 | 110m6 | 355h13 | 450/550 | 4~90 | 5~167 | 14940 | 430 |
| D167 | 120m6 | 425h13 | 550/660 | 7.5~160 | 10~230 | 20880 | 650 |
| D series double stages | |||||||
| Model | Output Shaft Dia. | Center Height | Output Flange Dia. | Power | Ratio | Permitted Torque | Output Speed |
| Solid (mm) | (mm) | (mm) | (kw) | (Nm) | (RPM) | ||
| D27D17 | 25k6 | 90h13 | 95/140 | 0.12~0.18 | 90~229 | 140 | 6~15 |
| D37D17 | 25k6 | 90h13 | 110/160 | 0.12~0.25 | 90~156 | 225 | 4.1~14 |
| D47D37 | 30k6 | 115h13 | 110/160 | 0.12~0.25 | 154~572 | 340 | 2.4~8.5 |
| D57D37 | 35k6 | 115h13 | 130/200 | 0.12~0.25 | 142~782 | 477 | 1.8~9.2 |
| D67D37 | 35k6 | 130h13 | 180/250 | 0.12~0.37 | 158~956 | 590 | 1.4~8.2 |
| D77D37 | 40k6 | 140h13 | 230/300 | 0.12~0.55 | 186~1430 | 880 | 0.97~7.3 |
| D87D57 | 50k6 | 180h13 | 250/350 | 0.12~1.1 | 195~2873 | 1665 | 0.48~7.2 |
| D97D57 | 60m6 | 225h13 | 350/450 | 0.12~2.2 | 209~4678 | 2930 | 0.29~6.8 |
| D107D77 | 70m6 | 250h13 | 350/450 | 0.12~2.2 | 214~7583 | 4510 | 0.18-6.6 |
| D137D77 | 90m6 | 315h13 | 450/550 | 0.12~4 | 35.1~12921 | 9090 | 0.11~6.3 |
| D147D77 | 110m6 | 355h13 | 450/550 | 0.12~4 | 415~21342 | 14940 | 0.06~3.4 |
| D147D87 | 110m6 | 355h13 | 450/550 | 1.5~11 | 159~533 | 14940 | 2.6~9.1 |
| D167D97 | 120m6 | 425h13 | 550/660 | 1.5~11 | 279~2333 | 20250 | 0.6~5.2 |
| D167D107 | 120m6 | 425h13 | 550/660 | 11 | 4.9~8.5 | 17640 | 4.9~8.5 |
| Remark: the weight without oil and motor, shaft and flange input add 10%. | |||||||
Package
Plastic bag + wooden carton
Certificate
FAQ
Q: Can you print other colors?
Yes. Customized color can be printed on the gear motor according to your requirements.
Q: Is that factory price?
Yes. We assure you all prices are based on factory.
Q: What is the life span? what is the guarantee
The lifespan of gear motor can reach 5-20 years depending on different working conditions .The guarantee time is one year after delivery.
Q: What documents are available?
A full range documents including structural drawings, packing list, installation manual and relative certificates can be provided. Moreover, customs declaration is provided. We provide one-stop service for you.
Q: Is it able to customized?
yes, we could re-design and produce the gear motor as your requirements if the quantity is large.
