Complaint
| model project | TH48D50NZ-S | |
| Output current (a) | 50 | |
| Power (KW) | 2.9 | |
| input voltage Scope (VAC) | minimum value | 93 (enter 165 to reduce power) |
| typical value | 20 (286-300 limited power output | |
| maximum | 264 | |
| Output adjustable norm Circumference (VDC) | minimum value | 43.2 |
| typical value | 48 | |
| maximum | 58 | |
| Voltage stabilization accuracy | ≤±0.5% | |
| Steady flow accuracy | ≤±0.5% | |
| Charger efficiency (efficiency) | ≥94% | |
| Power factor | 0.99 (more than half a year) | |
| Maximum audible noise (dB) | 55 | |
| Storage temperature (ºC) | minimum value | -40 |
| typical value | 25 | |
| maximum | 60 | |
| Working ambient temperature (ºC) | minimum value | -25 |
| typical value | 25 | |
| maximum | 55 | |
| Parallel uneven mobility | <±3% | |
| Start-up delay (seconds) | 3S-8S | |
| ripple coefficient | 200mV | |
| Load level | Class I (100%) works continuously at rated output current. | |
| Automatic current limiting characteristic | When the output current exceeds the set value of the output current limit, the output current will be constant and will not increase. | |
| Output overvoltage protection | Output voltage exceeds 63±5VDC, which automatically stops output to prevent equipment damage. | |
| Output short-circuit protection characteristics | When the output is short-circuited, the module will protect itself to prevent damage, and it can automatically resume working after troubleshooting. | |
