Complaint
Features
2-electrode measurement method;
Two SPST relays;
Two 4-20mA current output;
RS485 interface, support Modbus protocol;
Applied to various conductivity monitoring and control occasions.
Specification
| Model | AEC1-T2 | |
| Display range | Conductivity | 0.00~20.00 mS/cm, full range automatic switching |
| Resistivity | 0.00~18.00MΩ.cm | |
| TDS | 0.00~10g/L | |
| Temp | -10~150ºC | |
| Resolution | Conductivity | 0.001µS /cm |
| Resistivity | 0.01MΩ.cm | |
| TDS | 0.01mg/L | |
| Temp | 0.1ºC | |
| Relay control | 2 settable SPST relays with a maximum load of 3A/250VAC | |
| Accuracy | 1% of the measuring range | |
| Current output | 2 settable 0/4~20mA active current loop output, maximum load 1000Ω | |
| Communication method | Two-wire RS485 interface; MODBUS RTU | |
| Display screen | 128*64 LCD, adjustable backlight mode, adjustable display rate | |
| Configuration information | Power off protection, parameters are retained indefinitely | |
| Operating environment | 0~60ºC,relative humidity less than 95% RH( no condensation) | |
| Shell material | Enhanced ABS protection grade IP66 | |
| Size | Instrument size 100*100*120 mm | |
| Mounting method | panel installation (hole size 92*92 mm) | |
| Power supply | 18~36VDC or 100~240V AC 50/60Hz | |
