28 Gallon Abrasive Sandblaster with Vacuum/Sandblasting Pot/Sandblasting Tank

Min.Order: 1
Product origin: Jinan, Shandong, China
Infringement complaint: complaintComplaint
US$ 560 ~ 650

Description

28 Gallon Abrasive Sandblaster with Vacuum/sandblasting pot/sandblasting tank

Junda JD400DA-28 gallon sandblasting pot, built-in vacuum abrasive recovery system, Can use conventional abrasives such as garnet sand, brown corundum, glass beads, etc,built-in recovery vacuum motor and dust filter, can recycle abrasive, reduce.




Product Advantage& Parameters:
1, movable sand storage tank, rear wheel convenient transportation.
2, built-in recovery vacuum motor and vacuum filter element
3, can recycle abrasive, reduce the cost of rust removal.

ModelJD400DA
Dimensions1100×400×420mm
Tank size380 x 1040 mm in diameter
Sand blasting pressure0.6-0.8Mpa
Supporting air compressor7.5 KW and above
Sandblasting pipe3m
Capacity100 liters /28 gallons
Loading amount of sand25KG
Recycling machine1200W
Inlet ball valve port1 piece
Vacuum filter1 piece
Rubber wheel1 piece
Abrasive use36-320#
Sand-blasting gun1 Automatic return sandblast gun
Sand suction tube1 piece
Weight40KG
Matters need attention1. Personal protection should be done before work.
2. Do not use working pressure higher than permitted.
3. Use clean abrasives to prevent blockage of spray guns.
4. The air pressure in the tank should be unloaded to zero after the work is finished

Product Applications :

It is mainly used for all kinds of steel plate rust removal, steel structure rust removal, ship refurbishment, automobile refurbishment, anti-corrosion engineering, oil pipeline anti-rust removal, shipyard rust removal, engineering vehicles
Refurbishment, mechanical equipment refurbishment, metal mold surface sandblasting.


Product Attention :

1. If the protected brush transmission device is not in the proper position, put it right now.
2. Set the air compressor to 8 kg force/square centimeter.
(More or less, depending on the surface to be treated)
3. Connect the air pipe connector to the air inlet connector located on the handle.
4. Connect the power cable to the power supply.
5. Aim the gun at the surface to be cleaned and turn the switch on the top of the vacuum machine to the open position.
6,Hold the gun in one hand and the brush handle in the other. Note: Do not apply pressure by pointing the brush at the treated surface! The function of the brush is only to prevent the waste of sand, and then for grinding
The material is kept in a sealed vacuum cycle to achieve recirculation. Brushes are not expected to play an auxiliary role in abrasion processing.
7. Both hands should move in the direction of the rust removal or pre-painted working surface.
8. You can vary the size of the jet by extending or shortening the nozzle with a lock nut.
9, hard brush can be used for plane, can also be used for Angle, corner. Before you start, spread the bristles out so they don't cover the spray holes in the brush.(Abrasives wear down the bristles).
    On the edge of the car door, we suggest that you wrap stiff hair around the edge of the door for good vacuum environment and good coverage.
10. After each work, remove the vacuum brush and flick off the dust on the filter element. After one hour of continuous work, remove the vacuum brush and use DC air or vacuum cleaner 
Blow off the dust.
11. When spraying at a 90 degree Angle, adjust the gun at a 45 degree Angle to reach the deep position. Move the spray gun slowly in a circular motion to achieve the effect. After sandblasting, loosen the two clamps and empty
Dust collecting filter element and storing abrasive in a dry way.

Company Profile:
Jinan Junda Industrial Technology Co.,Ltd, established in 2005, is specialized in the development,manufacture, marketing and ser-vice-supplying of abrasives and sand blasting equipment, spare parts & protective tools.
Our main products include two fields: sand blasting cabinet, sand blasting can ,sand blasting nozle and protective helmet of mechanical equipment as well as garnet sand ,steel shot,steel grit and glass bead of abrasive.
Guided by the company craftsmanship spirit philosophy of "rational and precise, keep improving, remain dedicated, transmission and inno-vation", Junda devotes to supply perfect after-sale service and strives to become an intermationally competitive enterprise.

Packaging :
For such product, it is small and the carton package is suitble for it.


Certificate
Our Sandblasting pot is approved by the professional organization, the quality is trustworthy!

 
 
FAQ
Q1:
What's the delivery time?
A : 5-10 work days after receiving client's payment

Q2: What's package?
A: wooden box packaging

Q3: Do you have any timely technology supports?
A: we have a professional technology supporting team for your timely services. We prepare the technical documents for you, also
you can contact us by telephone, online chat (whats, skype, phone).

Q4: What's the payment method?
A: T/T, WESTERN UNION, MONEY GRAM,LC...

Q5: How to ensure that I received the machine undamaged?
A: At first , our package is standard for shipping, before packing, we will confirm product undamaged, otherwise, please contact
within 2days. Because we've bought insurance for you, we or shipping company will be responsible!


If any need,please contact with Ms Arya for more details,Don't hesitate to contact us for anything , we are glad to serve you!
Scroll to Top