Metal Air Power Supply/Jump Starter Galvanic Cell Primary Cell

Min.Order: 1
Product origin: Hefei, Anhui, China
Infringement complaint: complaintComplaint
US$ 699 ~ 799

Description

Basic Info.

MaterialPlastic+ABSBatterry TypeMagnesium Air battery
Transport PackageStandard Export PackageSpecification170(L)*110(W)*230(H)
TrademarkHigreaterWeight2.4kg
Production Capacity1000piece/MonthOriginChina
 

 Advantages:


1)Storage life longer than 10 years
2)Zero attenuation of stored non attenuated electricity
3)Easy to use 
4)With sufficient energy, meet 40 mobile phones charging demands 
5)Off grid power generation does not depend on the grid
6)Long lasting power generation, convenient and fast fuel replacement
7)High concealment without high temperature and noise
8)Zero pollution and no harmful substances
9)Small and portable, small size and light weight
10)Human contact with friendly neutral saline
11)Environmentally friendly and pollution-free substances
12)Resource friendly, large reserves and cheap materials
13)Safe and reliable without risk of ignition and explosion


Application Scenarios: 


Use direction:

1) Prepare 700ml of brine (about 10% concentration);
2) Open the latch, lift the upper cover of the battery, and confirm that the integrated plug is inserted in place, and the power supply is fast
The plug is connected;
3) Unscrew 6 vent valves, inject liquid into 6 battery cavities respectively, and add liquid to
It can be done without passing the metal plate (about 110ml for each monomer);
4) Close the upper cover of the battery, fasten the lock, press the power supply button, the power display lamp will display normally, and the battery activation is completed.
5) The battery is used for about 4h, and the liquid needs to be replaced;
6) Press the button to cut off the power supply, open the upper cover of the battery, pull out the power quick plug, and remove
Lower the upper cover of the battery;
7) Pull out the integrated plug, and then pull up the upper cover of the battery inner core from both sides of the battery inner core;
8) Dump the waste liquid and flush it.

9) Replace the components in turn, repeat the battery activation mode in 3.1, and complete the liquid change operation.

Patent certificates:


4. Laboratory
Product Tag:
Related categories:
Scroll to Top