Geotechnical Engineering Static Piles Load Testing Equipments

Min.Order: 1
Product origin: Qingdao, Shandong, China
Infringement complaint: complaintComplaint
US$ 3000 ~ 14000

Description
Geotechnical Engineering Static Piles Load Testing Equipments 

I. Product Description

The Static Loading Pile Testing Instrument is used to apply vertical pressure, vertical pull-up force or horizontal thrust on the top of the pile step by step, and observe the settlement, pull-up displacement or horizontal displacement of the top of the pile over time, so as to determine the corresponding vertical resistance of a single pile. Test equipment for compressive bearing capacity, vertical uplift bearing capacity of single pile or horizontal bearing capacity of single pile

The static load test adopts the slow maintenance load method, that is, the load is loaded step by step. After each level of load reaches a relatively stable level, the next level of load is added until the test pile fails, and then it is unloaded to zero in stages. When considering the load characteristics of the actual engineering piles, the multi-cycle loading and unloading method can be used (the load of each level is relatively stable and then unloaded to zero). When considering shortening the test time, for the inspection test of engineering piles, the rapid maintenance load method can be used, that is, a first-level load is generally added every one hour.


II. Product Application

 Pressure resistance, pull resistance, horizontal and self-balanced static load test of single pile
 Static load test of shallow (deep) layer plate and rock foundation
 Static load test of treated foundation and composite foundation
 Pull - out test of rock bolt
 Floor and bridge load test


III. Product Specification and Configuration

Specification
Model No.SLT
Main control unitIndustrial Microcomputer
Display screen12.1" true-color LCD display screen (high-brightness) 1024×768
Storage8GB
Power supplyDevice (AC 220V; DC 12.6V), Oil pump (AC 380/220V available)
Operation methodTouch screen
Data transmissionUSB2.0
Measurement and control methodWired/Wireless
Number of control pointsThe wireless mode supports up to 4 tests at the same time.
Data backupReal-time automatic backup
Video surveillanceIndependent HD camera
Working temperature-30ºC~+55ºC
Weight1.6kg
Dimension375mm × 300mm × 90mm

Configuration
No.ItemQtyRemark
1Host1Including GPRS, GPS, wireless communication modules
2PLC CNC Base Station1Including wireless communication module; standard 4 channels; Used as Displacement Data Collect Box
3Oil Pump Controller1Oil Pressure Data Collect Box
4Host Communication Cable1Length=30m
5FM Displacement Sensor4FM waterproof type, with 15 meters cable
6Pressure Sensor1With connecting cable
7Magnetic Stands4 
8Controlled Communication Cable1Length=10m/piece
9220/380V Input Cable1Length=2m/piece
10220/380V Output Cable1Length=2m/piece
11U Disk116G, storage data, including analysis software, XP system installation patches, analysis software installation instructions, typical data, typical reports, operating instructions, collection software upgrade reminder documents, static load tester introduction documents, static load test documents, static load testers Manipulate documents.
12Touch Pen1 
13Power Adapter212V/5A/GST60A12-P1J (12V/5A)
14Adapter Power Cord2220V power cord
15GPS External Antenna1GPS antenna static load
16Wireless Communication External Antenna2433M antenna (10 meters/piece)
17Instrument Case1 
18Accessory Box1With Dial Indicators with Magnetic Bases
19Quick Connector1Straight, Quick connector
20Others1User's Manual Book, Technical Video, 1 Year Warranty

If you need any other related accessories, please inform us.

IV. Product Photos


V. Using Spots




Product Tag:
Related categories:
Scroll to Top